Operation Manual

7
ENG
Registering the handset
To register a new handset:
1. On the base unit, press and hold the PAG E button until the blue In Use light
flashes.
2. Press the
button on the handset.
3. Press
to select Registration from the options.
4. Press
.
5. Press
or to select a base unit number that does not have a check
mark ( ) next to it.
(Checked numbers have already been registered.)
6. Press to display the PIN Code? prompt.
7. Enter the security PIN for the handset. The default PIN code is “0000”. For
more information about security PIN codes, refer to page 19.
8. Press
.
Result: The handset display will flash the words Base Search until it locates
the base unit. Once it finds the base unit, the base ID number will display on
the handset. The base ID number is the unique identifying number for your
base unit. You do not need to record or remember this number unless you
are trying to register your handset to the base unit of another telephone
system.
9. Press
to end the registration session.
Checking the base ID
To check the base ID for your handset:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press .
4. Press
to select Base ID from the options.
5. Press to view the base ID.
The new handset is now registered to the base unit.
Removing a handset
You may need to do this to replace a handset.
1. Press the
button on a handset that you do not intend to remove.
2. Press
to select Setup from the options.
3.Press
.