Operation Manual

In case of electrostatic discharge, the product may not function properly and will require
a manual reset. After reset, messages recorded will remain intact; if a message was
being recorded it will be lost.
USB cable is properly
attached
Cannot locate voice
recorder on PC
Error message states
unit is not properly
connected
Cannot store messages Error message states
memory is full
Erase some messages
(
-
>10) to make room
TIP: If the message is
important then you should
first save it (
-
>15)
Time-out error When transferring a
message to and from
PC to unit you get no
response or a time-out
USB cable is properly
attached
File error
When you try selecting
a file format that is not
supported
The file was not created by
Voice Recorder Link
software
Failed to save the file
to the selected path
When the selected output
path / drive is either full
or read only
Please make sure that the
selected drive has enough
free space, or that any write
protect features have been
disabled
Memory error When the PC does not
have enough memory for
the operation
Delete unwanted files on
your hard drive to create
space
Unable to playback
*.WAV files
When you do not have
compatible *.WAV format
file player
Install *.WAV format player
Problem Symptom Check This
18
Software
CAUTION
VR668 SX1 M-EN(6Apr) 4/6/04, 11:58 AM18