Operation Manual

1.9 Caller display

If you have subscribed to this service from your phone network operator, the

caller’s phone number will be shown on the handset display when there is an

incoming call. The phone can store the caller ID’s of up to 10 different call numbers.

Note: If the caller’s phone number was stored in the phone book, the

associated name will be displayed with the phone number.

Each entry in the caller list has:

* Caller number (up to 20 digits)

* The caller name (up to 8 characters) if this is stored in the phonebook or supplied

from the telephone network.

* The date and time of the last call

* The number of calls made to this number (up to 10)

New call indication

* When a new caller identification is received and

displayed during ringing, the caller identification

will show.

* If the call is not answered the handset display shows

“New Calls: N” to alert the user of new calls

received with the phone icon flashing on the left.

The indication will turn off once you have reviewed

the caller memory by pressing the

button.

Note: N indicates the number of new calls not yet viewed.

How to read the caller identification

1. With the handset in standby mode, press first to enter the list.

2. Press

or repeatedly to select the name you want to check.

3. Press

to check the phone number.

4. Press

again to check the time and date of the call.

Note: There is a warning tone when you reach the end of the list.