Operation Manual

44
Multi-handset use
“I’m having problems registering a new handset.”
* Unplug and plug in again the mains power cord of the base unit to activate the
registration procedure.
* Make sure you have selected a base number that is not already assigned, and
ensure you choose from the base numbers that are not flashing.
* The base unit may have already registered all 5 handsets. You need to de-
register (delete) one of them before registering a new handset.
* If you are replacing a faulty handset, make sure you have de-registered the
faulty one before registering the new one.
“I cannot make a call.”
* Only one outside call and one intercom call can take place at once. Make sure
no other handset user is already on a call.
* Please check if another handset has engaged the line already. If this is the case
you will see “EXT” on your handset. When you press
, you will hear the
engaged tone.
Advanced telephone features
Problems with programming
“ I changed the PIN, and I’ve forgotten the new one.”
* Please refer to section 6 Resetting your system.
Weather station features
“ I cannot register my sensor with the base unit. ”
* Select channel by pressing [CHANNEL] on the base unit.
* Reset the sensor and place it close to the base unit. Wait 10-15 minutes to
ensure the sensor has enough time to connect to the base unit.
OR
* Press & hold the [CHANNEL] button for 2-3 seconds, to enable the base unit to
search for the sensor.
“ I cannot set the clock and date. ”
* Press and hold the [ALARM] button until you see “TIME” on the display of the
base unit flashing, then press [
] or [ ] to amend.