Operation Manual

1.5 Connecting the base unit

Choose a suitable site for the base unit. Make sure it is not near to another

telephone, or other electrical equipment.

Installing Handset batteries

The two rechargeable Ni-MH Batteries (AAA size) come with your phone.

1. Fitting the batteries in the handset

Insert the two rechargeable batteries as indicated,

matching correct polarity (+,-)

Note: Reversing the orientation may damage the

handset.

Fit the battery compartment cover by

sliding it in the direction shown by the

arrow, so that it clicks firmly into place.

2. Charging the handset batteries

Before using the handset, charge the handset for at least 15 hours

When the battery is low ...

Whenever you see the battery icon on the handset display become nearly

empty,

or hear the warning tone during the call, please:

* End the call as soon as possible

* Don’t use the speakerphone mode for conservation since this will further

reduce the talk time

* Put the handset back on the base unit for charging until the battery icon

returns to high level.

To AC wall outlet

To phone wall jack