086-002169-021 W E AT H E R D E C T WITH CHARGER USER’S GUIDE WD338HSC
Contents 1. STANDARD FEATURES .......................................................... 4 1.1 KEY OPERATIONS .......................................................................... 4 1.2 INSTALLATION ................................................................................. 5 1.3 INSTALLING THE HANDSET UNIT ................................................ 5 1.4 TO REGISTER A NEW HANDSET ................................................. 6 1.5 BEFORE YOU START .............................
4. WEATHER FEATURES ........................................................... 2 7 4.1 WEATHER FORECASTING ON THE HANDSET ........................... 27 4.2 TEMPERATURE ON THE HANDSET ............................................. 27 5. GAMES ....................................................................................... 2 8 5.1 SNAKE GAME ................................................................................. 28 5.2 CAR GAME .........................................................
1 STANDARD FEATURES 1.1 Key operations 1 Clear button / Phonebook button / Mute - Press this to go to the previous menu or to clear last entered digit. - Press this to mute the microphone during call. - Press this to view the phonebook. 2 Down button / Caller ID - Press this to move through the menu or to decrease earpiece/speakerphone volume during a call. - Press this to review the caller display information. 3 Phone button Press this to begin and end a telephone call.
Care of the weather phone * Do not clean any part of your weather phone with benzene, thinner or other solvent chemicals - this may cause permanent damage that is not covered by the guarantee. When necessary, clean it with a damp cloth. * Keep your weather phone away from hot, humid conditions or strong sunlight. * Every effort has been made to ensure the highest standards of reliability for your weather phone.
2. Charging the handset batteries Before using the handset, charge the handset for at least 15 hours When the battery is low ... Whenever you see the battery icon on the handset display become nearly empty, or hear the warning tone during the call, please: * End the call as soon as possible * Don’t use the speakerphone mode for conservation since this will further reduce the talk time * Put the handset back on the charger for charging until the battery icon returns to high level.
To register a new handset * On the base unit, press and hold [PAGE] until the “In Use” LED (green LED) is flashing * On the new handset. 1. Press 2. Press and select “Registration” 3. Press the display shows 4. or key to select the base unit number which has no tick (The Press ticked bases are already in use) 5. Press 6. Enter the PIN code and then press (Default PIN is “0000”. Please refer to section 6 for more information) 7. Display shows “Base Search”.
To unregister a handset You may need to do this in order to replace a handset. 1. Press 2. Press and select “Setup” 3. Press 4. Press and select “Remove HS” 5. Press 6. Enter the PIN code and press 7. Press 8. Press or until the correct handset is selected to confirm Note: You cannot unregister the handset you are using To select a default base unit You will only need this function if your handset is registered to more than one base unit.
1.5 Before you start Out of range warning If your handset is out of range of the base unit, there is a beep sound to alert you, and the display will show: If so, please move closer to the base unit until the handset display stops flashing. Note: The out of range warning tone is activated in default setting. If you want to disable this tone, please refer to the section “Tone and Volume”.
Speakerphone * Press the speakerphone button to get the dial tone, and dial the number Or * Dial the number then press In each case, the display shows the call duration after about 15 seconds. Note: If you are in speaker phone mode and you want to use the handset, push button to switch off the speakerphone first. To answer a call The handset will ring when there is an external call. The icon [EXT] will flash regularly on the handset display.
1.7 Phone book The weather phone has 50 memories for storing telephone numbers up to 20 digits. The name of the phone number can be stored with a maximum of 8 characters To store a number in the memory 1. Press the button to select “Phonebook” 2. Press 3. Press 4. Select “Add Entry” 5. Press 6. The handset display shows “Name” 7. Enter the name (see key guide below) 8. Press 9. The handset display shows “Number” 10. Enter the number using the keypad 11. Press 12.
To make a call to a stored number 1. Press 2. Press number. 3. Press or and select the required entry. Press to begin a call. To clear a number from the memory 1. Press 2. Press to select “Phonebook” 3. Press 4. Press to select “Delete Entry” 5. Press 6. Press or and select the required entry 7. Press 8. The corresponding number is shown on the display 9. Press to confirm 10. The handset display shows “deleted” To modify a number from the memory 1. Press 2. Press to select “Phonebook” 3.
1.8 Caller display If you have subscribed to this service from your phone network operator, the caller’s phone number will be shown on the handset display when there is an incoming call. The phone can store the caller ID’s of up to 10 different call numbers. Note: If the caller’s phone number was stored in the phone book, the associated name will be displayed with the phone number.
To clear the call information * Repeat steps 1 to 4 of the above * Press again * Press once * Select the message “Delete?” * Press to clear the caller information (or press the caller information) if you don’t want to delete 1.9 During a call To mute the microphone It is possible to put an external on hold during a conversation. * Press * Press again to un-mute the microphone and return to the normal mode.
1.10 Tone and volume You can adjust the tone you hear from your weather phone to suit your own preferences. Key tone on/off Each time you press a key on your handset, you will hear a tone. To turn this off: * Press * Press * Press * Select the “Warning Tones” key or repeatedly to select the “Handset Menu” * Press * Select the “Key Press” * Press * Press * Press or and select “off” or “on” to confirm To return to standby mode, press and hold .
Out of range warning tone When the handset is moving out of the range from the base unit, you will hear the out of range warning tone. To turn this tone off: * Press * Press * * Press Select “Warning Tones” * Press * Press * Press * Press or * Press to confirm and select “Handset Menu” and select “Out of Range” and select key tone “off” or “on” Press and hold the button to return to standby mode. Handset ring tone You have a choice of five ring tones for external incoming calls.
* Press * Press * Press * Press * Press * Press or to select the desired handset ring volume To turn off the handset ringer, select “Volume Off” * Press and select “Handset Menu” once and select “Ring Volume” to confirm Press and hold to return to standby mode. Handset ring priority Ring priority allows you to set one handset to ring before others start.
2 MULTI-HANDSET USE 2.1 Paging the handset from the base unit This feature is very useful if you can’t remember where you put your handset. Make the lost handset ring for a fixed time of 30 seconds by pressing [PAGE] on the base unit. Note: You cannot have an intercom conver sation between the hndset and base unit. 2.2 Multi-handset use Up to 5 handsets can be registered to one base. Intercom between handsets If you have multiple handsets registered with the base, two handsets can make intercom calls.
Call waiting If an external call comes in during an intercom conversation, you will hear a “Call waiting” tone. 1. To terminate an intercom call, press 2. The external line will ring. Press answer the external call. phone again to Call transfer between handsets You can transfer an external call from one handset to another. 1. During an external telephone conversation, press hold. . Your caller will be put on 2. Key in the handset number (1 ~ 5) to which you want to the call transferred. 3.
2.4 Monitor Mode (Baby sit) This function is similar to intercom. It allows you to call the second handset automatically by internal call. If it is already set in monitor mode, you can listen to what is happening in another room by using the second handset like a microphone.
3 CUSTOMISING THE HANDSET 3.1 Your handset name The user name of your handset can be changed. To change this: 1. Press 2. Press and select “Handset Menu” 3. Press 4. Press and select “Handset Name” 5. Press 6. Change the name to your new selection (Maximum of 8 characters- please refer to 1.7 on how to use the keys) 7. Press to confirm 8. Press and hold to return to standby mode 3.
3.3 Handset display language The default language for the handset display is English . You can also change the handset display language to French, Spanish, Italian, German, etc. To change to other language 1. Press 2. Press and select “Handset Menu” 3. Press 4. Press and select “Language” 5. Press 6. Press 7. Press or and select your preferred language to confirm 8. Press and hold to return to standby mode 3.
3.5 Dial out restrictor (Baby call) With this option, users cannot use the weather phone to make any external calls, except to the pre-programmed baby call number. Important: When baby call is turned on, pressing any key on the handset will dial the pre-programmed Baby call number automatically. No other calls are allowed, including Emergency calls, unless you program the baby call number as the emergency call number 1. Press 2. Press and select “Babycall” 3. Press 4. Press and select “Number” 5.
3.6 Dial mode In order to provide compatibility with other telephone systems, your phone can be set to either pulse-dialing (same as rotary dial phones), or tone dialing (DTMF). To set the dial mode 1. Press 2. Press and select “Setup” 3. Press 4. Press and select ‘Dialling mode” 5. Press 6. Press 7. Press or and select “Pulse” mode or “DTMF mode” to confirm 3.7 PABX features It is possible to use your telephone with a PABX or a local telephone network.
3.9 Handset clock The user can change the handset time and the display format To change the handset time format (12 or 24 hour display): 1. Press 2. Press and select “Setup” 3. Press 4. Select “Clock Setting” 5. Press 6. Select “Hour format” 7. Press 8. Select hour format in 12 or 24 hours 9. Press to confirm 10.Press and hold to return to Standby mode To change the handset date format 1. Press 2. Press and select “Setup” 3. Press 4. Select “Clock Setting” 5. Press 6.
6. Press to select “Time Settings” 7. Press to enter Date setting mode 8. Press the keypad 0-9 to input the DDMM (Date / Month) 9. Press to confirm and enter Time setting mode 10.Press the keypad 0-9 to input the HHMM (Hour / Minute) 11.Press to confirm Remark: The latest setting on any handset will supercede the previous setting on other handset and base. 3.10 Handset alarm The weather handset has two independent alarms that you can turn on or off and change the settings on. 1. Press 2.
4 WEATHER FEATURES The weather base unit displays the weather forecast as well as the outdoor and indoor temperature and relative humidity. You may also set the alarm to activate, indicating when a certain temperature or humidity has been reached. 4.1 Weather forecasting on the handset To display the weather forecasting symbols on the handset: 1. Press 2. Press to select “Weather” 3. Press to select “Forecast” 4. Press to confirm 5.
5 GAMES The weather phone handset contains two games 5.1 Snake game * Press * Press and select “Games” * Press and select “Snake” Press or * to select the game level (game levels are from 1 - 5, where 1 = beginner and 5 = expert) * Press to start game Game Control Using the keypad, press as follows to direct the snake Key Direction 2 6 8 4 Note: When the snake is moving , you only need to turn the snake to the left or right. There is no need to move the snake forward.
How to play When the game starts, you will see a snake moving along the screen. To win the game, you will have to direct the snake to the eggs without hitting the wall or letting the snake hit itself. * When the game starts, the snake is moving in the direction of the arrow. * When the snake reaches the same row as the egg, press “4” key to turn the snake toward the egg. * The snake turns left and is now moving toward the egg. * After the snake reaches the egg, it will appear in a different position.
5.
How to play When the game starts, you are the one driving the car from right to left, and you will see there is a computer car driving from left to right. The computer car will try to crash into your car. In order to win the game you will have to drive your car, clear all the dots and avoid crashing into the computer car. * You are moving to the left and the computer is moving to the right. * When you reach the gap you may press “2” or “8” to cross to the next line to avoid crashing into the computer car.
6 RESETTING YOUR SYSTEM Important: If you need to reset your system you will lose any information that you have stored and all settings will return to their default settings There are two levels of reset procedures: Level 1: With your PIN code * Press * Press and select “Setup” * Press * Press and select “Default” * Press * Enter PIN code and press * Confirmation melody will come from handset Then both handset and base will start the reset sequences.
7 PROBLEMS If your weather phone is not working correctly, check the points here before returning it for repair. Whatever your problem, you should first check that: * You have installed the base unit correctly, and it is plugged into the telephone line and the mains power socket. * Mains power is switched on at the socket * You have installed the batteries into the handset If the problem persists please contact our help line on 0871 222 1966(ex. Ireland).
* You may need to change the dial type setting to Pulse dialing if your local telephone exchange does not support Tone dialing. “My call was cut off when I went out of range of the base unit. Now I cannot use my handset.” * Please move the handset closer to the base unit. “I hear a tone while I am using my handset, and the battery symbol on the display is “empty”.” * The battery needs to be recharged. Put the handset into the charger; it will take up to 15 hours to be fully charged.
Multi-handset use “I’m having problems registering a new handset.” * Unplug and plug in again the mains power cord of the base unit to activate the registration procedure. * Make sure you have selected a base number that is not already assigned, and ensure you choose from the base numbers that are not flashing. * The base unit may have already registered all 5 handsets. You need to deregister (delete) one of them before registering a new handset.
NOTES