Scientific stereo receiver VR383SX3

Full Reset

You may need to perform a FULL RESET if the unit does not function

properly even after the RESET Hole has been pressed. To perform a

FULL RESET, press and hold the ERASE button while using the blunt

stylus to press into the RESET hole.

NOTE: Recorded messages are COMPLETELY erased from all folders

after a Full Reset.

CONNECTING TO AN EXTERNAL EARPHONE

Using the earphone to listen to very loud

messages may cause permanent ear

damage. Only use the earphone during

Playback Mode, and lower the volume of

the recorder before listening.

CONNECTING TO AN EXTERNAL MICROPHONE

NOTE: The external microphone must be a

condenser type. Other types of microphones will

not work with your voice recorder.

TROUBLESHOOTING

This section includes a list of frequently asked questions for problems

you may encounter with your voice recorder. If your voice recorder is

not operating as you think it should, check here before arranging

for servicing.

VR383SX3 En Manl R3(V1.0) OP 12/18/04, 10:49 AM19

¶´ƒ