Instructions / Assembly

1 2
3 4
Top Frame Garment racks
Components
360 degree
Swivel hook
x1
x1 x2
x12 x4
Pin
4”
14.5”
14.9”
Product is completely assembled.
FOLDABLE 10-RACK GARMENT HANGER
Assembly Instructions
Parts Diagram
Please follow the installation instructions below
Garment
clamps
Garment rack(s)
Connection pins
Insert the 360 degree swivel hook into the top frame
middle support bar by pressing down on the swivel
hook until you hear a snap. Once the swivel hook is
snapped into place it is correctly installed.
Slide the Garment racks connection pins inwards
through the Top Frame holes until you hear a
snap. The pins are properly connected after you
hear the snap.
Slide each Garment Racks into the Top Frame
making sure the connection is correct and the holes
are properly aligned.
Garment
clamp
CARE INSTRUCTIONS:
Wipe clean with a damp cloth and air dry.