User Guide

31
ANSWERING MAChINE SETTINGS
(ECO710 ONLY)
TROuBLEShOOTING
Troubleshooting
ALWAYS check first that:
Youhavefollowedall the stepslistedintheuser
manual to install and set up your telephone.
Allconnectorsarermlyinsertedintheirsockets.
Mainspowertothebaseunitis switched on at the
socket.
Thehandset’sbatteriesarecorrectlyandsecurely
installed and are not run down.
Everyday use
"Icannotmakeoranswercalls"
• Ifthehandset’sdisplayisblank,itmayhavebeen
switched off. Press and hold the
END
keytoswitch
itbackon.
• Checkthatthebaseunit’smainspoweradapteris
plugged in and power is switched on.
• Thebaseunitneedsmainspowerfor normal
operationofthephone–notjustforchargingthe
batteries.
• Makesureyouareusingthetelephonelinecable
suppliedwithyourphone. Other telephoneline
cablesmightnotwork.Movethehandsetcloserto
thebaseunit.
• Checkthebatterylevelsymbolonthedisplay.
• Ifitislow,replacethehandsetonthebaseunitor
chargerpodtorechargethebatteries.
• Switch off power at the mains socket,waitfora
shorttimeandthenswitchbackon.Thismaysolve
theproblem.
"Icannotmakeacall"
• IfthehandsetdisplayshowsKEYSLOCKED,
pressandholdthe*buttontounlockitbeforeyou
makeacall.
• Onlyonehandset(orthebaseunit)canbe
connected to the outside line at a time.
• Ifanother handset is already using the line, you
needtowaituntilithasnisheditscall.
"WhenIpressonthekeys,nothinghappens"
• Makesurethebatteriesarettedinyourhandset.
IftheBatteryLevelsymbolonthedisplayshows
‘low’,putyourhandsetbackonthecradleto
charge.
"WhenIkeyinanumber,itappearsonthedisplay,
butIcannotmakeanoutsidecall"
• Tryadifferentpositionfor the base unit –
somewherehigherifpossible,orfurtherfromother
electrical equipment.
"The phone does not ring"
• Checkthatthebaseunit’smainspoweradapteris
plugged in and power is switched on.