DECT Digital Baby Monitor Secure 310 User Guide
TABLE OF CONTENTS 3 important safety information........................................................ 4 GETTING STARTED................................................................................... 7 ORICOM Digital Baby Monitor........................................................... 8 Setting up............................................................................................... 12 Using YOUR Digital Baby Monitor.................................................... 17 TROUBLESHOOTING..
important safety information Important Safety Information • It is very important that you read the User Guide carefully as it contains detailed information you will need to get the most from your Oricom Baby Monitor. If you have any issues setting up or using your Oricom Baby monitor please call our Customer support team. Our dedicated local team are more likely to be able to help you than the retailer where you made your purchase.
important safety information 5 • The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least one meter from other electronic equipment, such as microwave ovens or hi−fi devices, otherwise they could cause interference. During continual use the Baby unit power adaptors may become warm to the touch. This is normal and should not be a concern.
important safety information • Use only the batteries supplied with the product. Improper use, or use of unapproved batteries may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. • If you believe the batteries are damaged, remove product from the charger and stop using the product. Contact Oricom for assistance. Never use a damaged battery.
GETTING STARTED 7 This User Guide provides you with all the information you need to get the most from your Oricom Digital Baby Monitor. Got everything? • Baby unit Please read this guide carefully and keep it for future reference. • 2 x AA NiMH 1300mAh rechargeable batteries for Parent unit (pre-installed) Need help? If you need assistance setting up or using your Oricom Digital Baby Monitor call our Support team on 1300 889 785.
ORICOM Digital Baby Monitor Parent unit Power on/off (on top of unit) Press and hold to switch the power on or off. Lanyard attach point (top of unit) You can loop a lanyard (not supplied) through here. Baby sound level LEDs Indicates the level of received sound. The LEDs will light up progressively as the sound increases. See page 18 for further information. Mute All (on top of unit) Press to toggle the Parent unit receive volume between on and off.
ORICOM Digital Baby Monitor 9 Parent unit charger Front Charging light Red when the Parent unit is correctly placed on the charger. Back Power socket For connection to the mains power socket via the power adaptor cable supplied.
ORICOM Digital Baby Monitor Baby unit Microphone Nightlight Press to switch the Nightlight on or off. Power on/off Press and hold to switch the power on or off. Link indicator Steady green indicates that the Baby and Parent units are linked. Flashes green if not linked for the first 30 seconds. Flashes red if not linked for longer than 30 seconds. Also flashes green when the Talk button is pressed on the Parent unit to initiate parental talk back.
ORICOM Digital Baby Monitor 11 Back of Baby unit Power socket For connection to the mains power socket via the power adaptor cable supplied.
Setting up Parent unit 1. Plug one of the power adaptor cables into the socket marked on the back of the Parent unit charger and plug the other end into the mains power wall socket and switch the power on. 2. Activate the batteries by pulling the plastic tab away from the back of the Parent unit.
Setting up 13 3. Place the Parent unit into the charger. The red charging light will illuminate on the charger and the battery icon will start scrolling on the Parent until display to indicate that the batteries are being charged. HDSound Charging light Leave the batteries to charge for 16 hours to reach maximum charge. Warning ! Only use the power adaptors supplied. Using incorrect power may permanently damage your product. This product is designed for indoor use only.
Setting up Battery performance Rechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new batteries do not reach full capacity until they have been in normal use for several days. The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the performance time of the Parent unit. Eventually they will need to be replaced. New batteries can be obtained from the Oricom Digital Baby Monitor Support Centre 1300 889 785.
Setting up 15 Switch on and link the Parent and Baby units 1. Press and hold the button on the Baby unit for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash. 2. Press and hold the button on the Parent unit until all the LEDs on the unit briefly illuminate. The green Link indicator will flash. Warning ! Never use non-rechargeable batteries in the Parent unit. Only use the recommended type – 2 x AA NiMH 1300mAh batteries.
Setting up If the link is broken: • check that the mains power is plugged in and switched on at the Baby unit • check that both units are switched on • check that the batteries are charged in the Parent unit • check that the Parent and Baby units are within range of each other (in ideal conditions the range is up to 300 metres outdoors and 50m indoors) Positioning your units The Baby unit should ideally be within 1m-2m of your baby for best performance.
Using YOUR Digital Baby Monitor 17 Switching on/off Switch the Baby unit on 1. Press and hold the button for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit. Once linked the green Link indicator will remain on. Switch the Parent unit on 1. Press and hold the button on the Parent unit until all the LEDs briefly illuminate. The green Link indicator will flash.
Using YOUR Digital Baby Monitor Baby sound level LED indicators LEDs 1-2 = Green (or Amber if Mute Low is on) LEDs 3-4 = Green LEDs 5-7 = Red The seven LEDs across the top of the Parent unit light up to indicate the level of sound being received from the Baby unit. The LEDs light up progressively as the sound increases. LEDs 1-2 light up Green (or Amber if Mute Low is on, see page 18) when sounds of 57dB and 63dB are received. LEDs 3-4 light up Green when sounds of 69dB and 75dB are received.
Using YOUR Digital Baby Monitor 19 Adjust the Parent unit loudspeaker volume There are 5 volume levels and off (Mute). The default loudspeaker volume is Level 3. 1. Press or to select the required level. You will hear a difference in volume as you keep pressing the button(s). If you wish to switch the volume off, keep pressing button.
Using YOUR Digital Baby Monitor Mute All feature – Parent unit only The Mute All feature prevents any sound coming from the Parent unit loudspeaker. With Mute All on you can still monitor your baby using the Baby sound level LED indicators (page 18) and the Crying Alert (below). 1. To switch Mute All on, press the Mute indicator will illuminated red. 2. To switch Mute All off, press the switch off. button located on the top of the unit. The button again.
Using YOUR Digital Baby Monitor 21 When Mute Low is switched on, any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level. The set level are sounds that are louder than the first two green LEDs would register, as described in ‘Baby sound level LED indicators’ on page 18. If the or buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low will be switched off and the loudspeaker volume will return to Level 3 automatically.
Using YOUR Digital Baby Monitor You will be able to activate Talk Back mode even if other functions have been activated at the Baby unit like Music playback or Nightlight on. Do not press the button when the Baby unit and Parent unit are positioned in the same room. High-pitch noise will be generated if the button is pressed when Baby unit and Parent unit are close to each other or within 3 metres distance.
Using YOUR Digital Baby Monitor 23 List of tones Your Baby Monitor unit can produce various tones. They have the following meaning: Tone Meaning Single tone Confirmation tone e.g. setting saved. Double tone (fast) Error tone e.g. max volume reached when adjusting volume. Double tone (slow) User alert e.g. crying alert, paging alert etc. Triple tone (fast) System alert e.g. link lost, battery low etc. User Alert tones can be silenced by pressing any button on the Parent unit.
Using YOUR Digital Baby Monitor Reset the Parent unit 1. Within 3 seconds of the Parent unit being switched on, press and hold the button for at least 10 seconds. The display will show Reset for 2 seconds during the reset and then you will hear a confirmation beep once the reset has been performed. Reset the Baby unit 1. Within 3 seconds of the Baby unit being switched on, press the button for at least 10 seconds. You will hear a confirmation beep once the reset has been performed.
TROUBLESHOOTING 25 S hould you experience difficulties operating the SC310 please refer to the troubleshooting guide below. If you still experience difficulties please contact Oricom Customer Support on 1300 889 785 for assistance. Troubleshooting Problems Link light does not come on Link light is flashing green Link indicator is flashing red Solutions − C heck that both the Baby and Parent units are switched on.
TROUBLESHOOTING Battery low on Parent unit Parent unit remains silent or very quiet You can hear a high pitched noise Talk back feature is not working − Put the Parent unit back on the charger to charge. − Place Parent unit back on the charger as frequently as possible or ideally leave it on the charger to ensure the batteries remain charged. − To shorten the charging time you can turn the Parent unit off if it is not being used while it is charging.
WARRANTY 27 Warranty Information (Australia) Oricom makes no other warranties or conditions, express or implied, including as to acceptable quality and fitness for a particular purpose, except as stated in this Warranty. Any implied warranties that may be imposed by law are limited in duration to the Warranty Period. Oricom warrants that the product is free from defects in materials or workmanship during the Warranty Period.
WARRANTY During the Warranty Period, Oricom will where possible repair and if not replace the faulty product or part thereof. All component parts removed under this Warranty become the property of Oricom. In the unlikely event that your Oricom product has a re curring failure, Oricom may, subject to the Competition and Consumer Act 2010, at its discretion, elect to provide you with a replacement product of its choosing that is at least equivalent to your product in performance.
WARRANTY 29 4 modification to the product or services carried out on the production by anyone other than Oricom or Oricom's authorised service provider. Oricom will not be liable for any damages caused by the product or the failure of the product to perform, including any lost profits or savings or special, incidental or consequential damages. Oricom is not liable for any claim made by a third party or made by you on behalf of a third party.
Customer Support If you have any problems setting up or using this product you will find use-full tips and information in the Troubleshooting section of this user guide as well as “Frequently Asked Questions” on our website www.oricom.com.au. If you have further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories please call our Customer Support Team.