Premium DECT Digital Baby Monitor Secure 510 User Guide
TABLE OF CONTENTS 3 IMPORTANT SAFETY INFORMATION ....................................................... 4 GETTING STARTED .................................................................................. 7 ORICOM DIGITAL BABY MONITOR .......................................................... 8 SETTING UP .............................................................................................. 14 USING YOUR DIGITAL BABY MONITOR ................................................... 19 TROUBLESHOOTING .
IMPORTANT SAFETY INFORMATION Important Safety Information s )T IS VERY IMPORTANT THAT YOU READ THE 5SER 'UIDE CAREFULLY AS IT CONTAINS DETAILED information you will need to get the most from your Oricom Baby Monitor. If you HAVE ANY ISSUES SETTING UP OR USING YOUR /RICOM "ABY MONITOR PLEASE CALL OUR Customer support team. Our dedicated local team are more likely to be able to help you than the retailer where you made your purchase.
IMPORTANT SAFETY INFORMATION 5 s 4HE INSTALLATION LOCATION PLAYS AN IMPORTANT ROLE IN ENSURING PROPER OPERATION Therefore, maintain a distance of at least one meter from other electronic EQUIPMENT SUCH AS MICROWAVE OVENS OR HI¥l DEVICES OTHERWISE THEY COULD CAUSE INTERFERENCE $URING CONTINUAL USE THE "ABY UNIT POWER ADAPTORS MAY become warm to the touch. This is normal and should not be a concern.
IMPORTANT SAFETY INFORMATION s 5SE ONLY THE BATTERIES SUPPLIED WITH THE PRODUCT )MPROPER USE OR USE OF UNAPPROVED BATTERIES MAY PRESENT A RISK OF lRE EXPLOSION OR OTHER HAZARD AND MAY INVALIDATE ANY APPROVAL OR WARRANTY s )F YOU BELIEVE THE BATTERIES ARE DAMAGED REMOVE PRODUCT FROM THE CHARGER AND STOP USING THE PRODUCT #ONTACT /RICOM FOR ASSISTANCE .EVER USE A DAMAGED battery.
GETTING STARTED 7 This User Guide provides you with all the information you need to get the most from your Oricom Digital Baby Monitor. 'OT EVERYTHING s "ABY UNIT Please read this guide carefully and keep it for future reference. s X !! .I-( M!H rechargeable batteries for Parent unit (pre-installed) Need help? If you need assistance setting up or using your /RICOM $IGITAL "ABY -ONITOR CALL OUR 3UPPORT team on 1300 889 785.
ORICOM DIGITAL BABY MONITOR Parent unit Mute Low (on top of unit) Press to toggle the Baby unit microphone SENSITIVITY BETWEEN normal and Mute Low. Mute All (on top of unit) Press to toggle the 0ARENT UNIT RECEIVE VOLUME BETWEEN on and off. Baby sound level LEDs )NDICATES THE LEVEL OF RECEIVED SOUND 4HE ,%$S WILL LIGHT UP PROGRESSIVELY AS THE SOUND increases. See page 20 for further information. Torch (on back of unit) Press to switch the torch feature on and off.
ORICOM DIGITAL BABY MONITOR 9 Parent unit display icons Menu options: Nightlight Music Feed Timer Setup Battery status 4EMPERATURE ALERT VIBRATE ON &EED TIMER ON VIBRATE ON 4EMPERATURE ALERT VIBRATE OFF &EED TIMER ON VIBRATE OFF Nightlight is on Full charge (75-100%) Medium charge (51-74%) Low charge (25-50%) Empty (8-24%) Flashing (0-7%) Icon will scroll when charging Music is playing $ISPLAYS THE TEMPERATURE AS measured at the Baby unit #RYING ALERT VIBRATE ON #RYING ALERT VIBRATE OFF
ORICOM DIGITAL BABY MONITOR Parent unit charger Front Charging light Red when the Parent unit is correctly placed on the charger. Back Power socket For connection to the mains POWER SOCKET VIA THE POWER adaptor cable supplied.
ORICOM DIGITAL BABY MONITOR Baby unit Nightlight Press to switch the Nightlight on or off. Power on/off Press and hold to switch the power on or off. Skip forward When music has been switched on (see Music button description below), press to skip through the SONGS AVAILABLE Music Press to switch music on at the Baby unit (the music and duration will be as last set at the Parent unit). Press again to switch the music off. To change the song, press the Skip button.
ORICOM DIGITAL BABY MONITOR Back of Baby unit Power socket For connection to the mains power SOCKET VIA THE POWER ADAPTOR CABLE supplied.
ORICOM DIGITAL BABY MONITOR Parent unit menu map Nightlight 13 Turn (On/Off)? Brightness High Medium Low Timer 5 min 10 min 15 min Constant (Play/Stop)? Music Choose Song Timer Menu 5 min 10 min 15 min Constant (Start/Stop) Timer Feed Timer Duration Set Time Timer Repeat Repeat On Repeat Off Timer Alert Crying Alert Setup Temp Alert Backlight Beep Beep&Vibe Vibrate Screen only On w alerts Off w alerts 3 Blind Mice Brahms #ANON IN $ $REAM #HASE $REAMING Hush Baby Night Night Twinkle Star P
SETTING UP Parent unit 1. Plug one of the power adaptor cables into the socket marked on the back of the Parent unit charger and plug the other end into the mains power wall socket and switch the power on. !CTIVATE THE BATTERIES BY PULLING THE PLASTIC TAB AWAY FROM THE BACK OF THE 0ARENT unit.
SETTING UP 15 3. Place the Parent unit into the charger. The red charging light will illuminate on the charger and the battery icon will start scrolling on the Parent until display to indicate that the batteries are being charged. Low battery indicator Battery icon Charging light ,EAVE THE BATTERIES TO CHARGE FOR HOURS TO REACH MAXIMUM CHARGE 7HEN THE batteries are fully charged the battery icon on the display will show a full charge .
SETTING UP Battery performance Rechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new BATTERIES DO NOT REACH FULL CAPACITY UNTIL THEY HAVE BEEN IN NORMAL USE FOR SEVERAL DAYS The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the PERFORMANCE TIME OF THE 0ARENT UNIT %VENTUALLY THEY WILL NEED TO BE REPLACED .
SETTING UP 17 Switch on and link the Parent and Baby units 1. Press and hold the button on the Baby unit for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash. 2. Press and hold the BUTTON ON THE 0ARENT UNIT UNTIL ALL THE ,%$S ON THE UNIT BRIEmY illuminate. The green Link indicator will flash and the display will show I’m Linking. Warning .EVER USE NON RECHARGEABLE BATTERIES IN THE 0ARENT UNIT /NLY USE THE RECOMMENDED TYPE n X !! .
s s s s SETTING UP If the link is broken: CHECK THAT THE MAINS POWER IS PLUGGED IN AND SWITCHED ON AT THE "ABY UNIT CHECK THAT BOTH UNITS ARE SWITCHED ON CHECK THAT THE BATTERIES ARE CHARGED IN THE 0ARENT UNIT CHECK THAT THE 0ARENT AND "ABY UNITS ARE WITHIN RANGE OF EACH OTHER IN IDEAL conditions the range is up to 300 metres outdoors and 50m indoors) Positioning your units The Baby unit should ideally be within 1m-2m of your baby for best performance.
USING YOUR DIGITAL BABY MONITOR 19 Switching on/off Switch the Baby unit on 1. Press and hold the button for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit. Once linked the green Link indicator will remain on. Switch the Parent unit on 1. Press and hold the BUTTON ON THE 0ARENT UNIT UNTIL ALL THE ,%$S BRIEmY illuminate. The green Link indicator will flash and the display will show I’m Linking.
USING YOUR DIGITAL BABY MONITOR Baby sound level LED indicators LEDs 1-2 = Green (or Amber if Mute Low is on) LEDs 3-4 = Green LEDs 5-7 = Red 4HE SEVEN ,%$S ACROSS THE TOP OF THE 0ARENT UNIT LIGHT UP TO INDICATE THE LEVEL OF SOUND BEING RECEIVED FROM THE "ABY UNIT 4HE ,%$S LIGHT UP PROGRESSIVELY AS the sound increases.
USING YOUR DIGITAL BABY MONITOR 21 Adjust the loudspeaker volume At the Parent unit: or TO SELECT THE REQUIRED LEVEL 4HE lRST PRESS WILL SHOW THE CURRENT 1. Press SETTING 4HERE ARE VOLUME LEVELS AND OFF -UTE 4HE VOLUME LEVEL WILL BE SHOWN ON THE DISPLAY AT EACH PRESS E G ,EVEL IS SHOWN AS Volume . until the display shows )F YOU WISH TO SWITCH THE VOLUME OFF KEEP PRESSING Volume Off. The Mute All indicator will illuminate. At the Baby unit: 4HERE ARE VOLUME SETTINGS 1.
USING YOUR DIGITAL BABY MONITOR Mute All feature – Parent unit only 4HE -UTE !LL FEATURE PREVENTS ANY SOUND COMING FROM THE 0ARENT UNIT loudspeaker. With Mute All on you can still monitor your baby using the Baby SOUND LEVEL ,%$ INDICATORS PAGE AND THE #RYING !LERT PAGE 1. To switch Mute All on, press the Mute indicator will illuminated red. 2. To switch Mute All off, press the switch off. button located on the top of the unit. The button again.
USING YOUR DIGITAL BABY MONITOR 23 )F THE 0ARENT UNIT RECEIVES SOUND UP TO THE LEVEL OF THE lRST TWO ,%$S THEN THEY WILL TURN AMBER BUT NO SOUND WILL BE HEARD IF THE SOUND RISES ABOVE THIS LEVEL then the unit will un-mute so you can hear the sounds. button located on the top of the Parent 1. To switch Mute Low on, press the unit. The Mute indicator will turn amber. 2. To switch Mute Low off, press the button again. The amber indicator will switch off.
USING YOUR DIGITAL BABY MONITOR Find 9OU CAN PRESS THE button on the Baby unit to make the Parent unit sound AN ALERT TO HELP YOU lND IT IF IT S BEEN MISPLACED )F THE 0ARENT UNIT LOUDSPEAKER VOLUME HAD BEEN -UTED OR SET TO VOLUME OFF THE VOLUME LEVEL WILL BE RESET TO THE DEFAULT SETTING OF ,EVEL on the Baby unit. The paging alert will sound at the Parent unit and 1. Press the display will show Here I am! 2.
USING YOUR DIGITAL BABY MONITOR 25 The Parent unit menu The button on the Parent unit can be used to select and change settings on the "ABY UNIT WITHOUT HAVING TO RISK DISTURBING YOUR BABY 9OU CAN ACCESS THE SETTINGS BY 1. Press then press or the top of the display. Press to scroll through the menu options shown on when the option you want is displayed. to scroll through the 4HE lRST SUB MENU OPTION WILL BE DISPLAYED PRESS options. The ( arrows) indicate when you can scroll either up or down.
USING YOUR DIGITAL BABY MONITOR Switch nightlight on/off using the Parent unit 1. To switch on, press the button. Nightlight is displayed, press . . Light On will briefly be displayed, then the 2. Turn On? is displayed, press icon. 3. To switch off, press . Nightlight is displayed, press . Turn Off? is displayed, press . Light Off will briefly be displayed and then the icon will disappear. Select the nightlight brightness level using the Parent unit 1. Press . Nightlight is displayed, press . 2.
USING YOUR DIGITAL BABY MONITOR 27 Play music from the Baby unit The Baby unit has eight songs that can be played to gently soothe your baby. 9OU CAN SELECT ONE SONG TO PLAY REPEATEDLY OR SELECT THE 0LAY !LL OPTION FOR A medley of all eight songs. The songs can be set to play in a loop for 5, 10 or 15 MINUTES OR YOU CAN LEAVE THEM PLAYING CONSTANTLY The default music setting is Play All songs Constantly. Turn music on/off using the Baby unit 1. To turn the music on, press the button.
USING YOUR DIGITAL BABY MONITOR Choose a song to play using the Parent unit 1. Press . Nightlight is displayed, press to display Music and press . 2. Play? is displayed, press to display Choose Song and press . 5SE THE and buttons to scroll through the eight song titles and Play All. Press when the option you want is displayed.
USING YOUR DIGITAL BABY MONITOR 29 Feed Timer 9OU CAN SET A &EED 4IMER ON THE 0ARENT UNIT TO ACT AS A COUNTDOWN TIMER THAT WILL ALERT YOU WHEN YOU NEXT NEED TO FEED YOUR BABY 9OU HAVE A CHOICE OF ALERT TYPES BEEP BEEP VIBE AND VIBRATE AND YOU CAN SET THE TIMER TO REPEAT ITSELF once the alert sounds. Set the feed timer countdown duration 1. Press . Nightlight is displayed, press until Feed Timer is displayed and . press 2. Start? is displayed, press to display Duration and press . 3.
USING YOUR DIGITAL BABY MONITOR Start the feed timer countdown 1. Press . Nightlight is displayed, press until Feed Timer is displayed and press . 2. Start? is displayed, press . The display will briefly show Timer On and then the timer will be shown counting down the seconds from the time you set. 7HEN THE TIMER HAS lNISHED COUNTING DOWN TO 00:00 you will hear an alert beep and the timer digits and icon will flash. Press any button on the Parent unit to stop the alert.
USING YOUR DIGITAL BABY MONITOR 31 Switch timer repeat option on or off 1. Press . Nightlight is displayed, press until Feed Timer is displayed and . press 2. Start? is displayed, press until Timer Repeat is displayed and press . 3. 5SE THE and buttons to display either Repeat On or Repeat Off and press to select. The display will show Saved AND YOU WILL HEAR A CONlRMATION BEEP When Repeat On has been set, the feed timer countdown will start again once the alert has sounded if it is not switched off.
USING YOUR DIGITAL BABY MONITOR IMPORTANT 4HE TEMPERATURE SENSOR USED IN THIS /RICOM $IGITAL "ABY -ONITOR IS INTENDED AS A GUIDE TO PROVIDE PARENTS WITH AN INDICATION OF THE ROOM TEMPERATURE IN WHICH THE Baby unit has been placed. It is designed to operate within an approximate tolerance of +/- 1°C and is not INTENDED TO BE AS ACCURATE AS SOME MEDICAL DEVICES 0LEASE NOTE THAT YOUR OWN temperature reference e.g.
USING YOUR DIGITAL BABY MONITOR 33 Temperature monitor indicators Temperature On the Parent unit Below 16°C $ISPLAY SHOWS Too Cold 16 – 20°C 21 – 24°C $ISPLAY SHOWS Too Warm /VER # $ISPLAY SHOWS Too Hot Select the type of temperature alert 1. Press press . Nightlight is displayed, press until SetUp is displayed and . 2. Crying Alert is displayed, press until Temp Alert is displayed and press . 3.
USING YOUR DIGITAL BABY MONITOR Temperature alert options Beep = Parent unit will beep. icon will flash. Beep&Vibe 0ARENT UNIT WILL BEEP AND VIBRATE icon will flash. Vibrate 0ARENT UNIT WILL VIBRATE icon will flash. Screen Only = icon will flash. Off = No alerts. icon will not be displayed. !LL OF THE ABOVE ALERTS WILL ALSO DISPLAY THE APPROPRIATE MESSAGE Too Hot, Too Warm or Too Cold. Pre-set temperature alert range The Baby unit comes with pre-set maximum and minimum temperatures.
USING YOUR DIGITAL BABY MONITOR 35 Select the type of crying alert 1. Press . Nightlight is displayed, press until SetUp is displayed and press . 2. Crying Alert is displayed, press . 3. 5SE THE and buttons to display either Beep, Beep&Vibe, Vibrate or Screen Only and press to select. The display will show Saved and you will HEAR A CONlRMATION BEEP To stop an alert beep, press any button on the Parent unit.
USING YOUR DIGITAL BABY MONITOR Backlight 9OU CAN SELECT WHETHER OR NOT THE ,#$ BACKLIGHT COMES ON WHEN AN ALERT IS ACTIVATED 7HEN THE BACKLIGHT COMES ON IT WILL STAY ON FOR SECONDS 4HE default setting is On. . Nightlight is displayed, press until SetUp is displayed and 1. Press press . 2. Crying Alert is displayed, press until Backlight is displayed and press . 3. 5SE THE and buttons to display either On w alerts or Off w alerts and press to select.
USING YOUR DIGITAL BABY MONITOR 37 5SER !LERT TONES CAN BE SILENCED BY PRESSING ANY BUTTON ON THE 0ARENT UNIT System Alerts can be silenced for a 5 minute period by pressing any button on the Parent unit. Reset the units Resetting either units will return the settings at that unit back to its default settings. 2ESETTING THE UNITS IS ONLY ADVISABLE IF YOU ARE EXPERIENCING DIFlCULTIES WITH YOUR PRODUCT )T IS A USEFUL feature that ensures your Baby Monitor is returned to its new “out of the box” settings.
TROUBLESHOOTING Should you experience difficulties operating the SC510 please refer to the TROUBLESHOOTING GUIDE BELOW )F YOU STILL EXPERIENCE DIFlCULTIES PLEASE CONTACT /RICOM Customer Support on 1300 889 785 for assistance. Troubleshooting Problems Link light does not come on Link light is flashing green Link indicator is flashing red Solutions ¥ #HECK THAT BOTH THE "ABY AND 0ARENT UNITS ARE switched on.
TROUBLESHOOTING Battery low on Parent unit Parent unit remains SILENT OR VERY QUIET 9OU CAN HEAR A HIGH pitched noise Talk back feature is not working 39 ¥ 0UT THE 0ARENT UNIT BACK ON THE CHARGER TO CHARGE ¥ 0LACE 0ARENT UNIT BACK ON THE CHARGER AS FREQUENTLY AS POSSIBLE OR IDEALLY LEAVE IT ON THE CHARGER TO ENSURE the batteries remain charged. ¥ 4O SHORTEN THE CHARGING TIME YOU CAN TURN THE 0ARENT unit off if it is not being used while it is charging.
CUSTOMER SUPPORT Customer Support )F YOU HAVE ANY PROBLEMS SETTING UP OR USING THIS PRODUCT YOU WILL lND USEFUL tips and information in the Troubleshooting section of this user guide as well as “Frequently Asked Questions” on our website www.oricom.com.au. )F YOU HAVE FURTHER QUESTIONS ABOUT USING THE PRODUCT AFTER REVIEWING THE RESOURCES ABOVE OR WOULD LIKE TO PURCHASE REPLACEMENT PARTS OR ACCESSORIES please call our Customer Support Team.
WARRANTY 41 How to make a claim under Warranty in Australia Oricom has a simple warranty process for you to follow: s 0LEASE CALL OR EMAIL OUR #USTOMER 3UPPORT 4EAM CONTACT DETAILS FOLLOW s ! #USTOMER 3UPPORT 4EAM MEMBER WILL VERIFY AFTER TROUBLESHOOTING WITH YOU IF YOUR PRODUCT QUALIlES UNDER WARRANTY )F SO THEY WILL GIVE YOU A 0RODUCT Return Authorisation number. s 7E WILL THEN EMAIL OR FAX A 2ETURN !UTHORISATION FORM AND A 2EPAIR .
WARRANTY Important Information Repair Notice Please be aware that the repair of your goods may result in the loss of any user-generated data (such as stored telephone numbers, text messages and CONTACT INFORMATION 0LEASE ENSURE THAT YOU HAVE MADE A COPY OF ANY DATA SAVED ON YOUR GOODS BEFORE SENDING FOR REPAIR Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of the same type rather than being repaired.
WARRANTY 43 Warranty Information (Australia) 4HIS 7ARRANTY IS PROVIDED BY /RICOM )NTERNATIONAL 0TY ,TD !". 5NIT 3OVEREIGN 0LACE 3OUTH 7INDSOR .37 HEREIN AFTER REFERRED TO as “Oricom”. Oricom makes no other warranties or conditions, express or implied, including AS TO ACCEPTABLE QUALITY AND lTNESS FOR A PARTICULAR PURPOSE EXCEPT AS STATED IN this Warranty. Any implied warranties that may be imposed by law are limited in duration to the Warranty Period.
WARRANTY Products distributed by Oricom are manufactured using new materials or new AND USED MATERIALS EQUIVALENT TO NEW IN PERFORMANCE AND RELIABILITY 3PARE PARTS MAY BE NEW OR EQUIVALENT TO NEW 3PARE PARTS ARE WARRANTED TO BE FREE FROM defects in material or workmanship for thirty (30) days or for the remainder of the Warranty Period of the Oricom branded product in which they are installed, WHICHEVER IS LONGER $URING THE 7ARRANTY 0ERIOD /RICOM WILL WHERE POSSIBLE repair and if not replace the fau
WARRANTY 45 1. failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product; 2. negligence on your part or misuse by you of the product; 3.
Contact Details for Oricom support and Warranty claims in Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Australia Email: support@oricom.com.au Phone: 1300 889 785 (Monday to Friday 8am to 6pm AEST) Web: www.oricom.com.au Fax: (02) 4574 8898 Contact details for Oricom Support and Warranty Claims in New Zealand Email: support@oricom.co.nz Phone: 0800 674 266 (Monday to Friday 10am to 8pm NZST) Web: www.oricom.co.
