USER’S MANUAL U Receipt Printer BTP-R880NP Shandong New Beiyang Information Technology Co.
BTP-R880NP User’s Manual Declaration Information in this document is subject to change without notice. SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to improve products as new technology, components, software, and firmware become available. If users need further data about this product or have any doubt about safety issues that might arise from using it, please feel free to contact your local dealer.
BTP-R880NP User’s Manual General Safety Information Before installing and using the printer, please read the following items carefully. 1. Safety instructions Don’t touch the tear bar of printer. The print head is a thermal element and it is at high temperature during printing or just after operation, therefore please do not touch it and its peripherals for safety reasons. The thermal head is an ESD-sensitive device. To prevent damage, do not touch either its printing part or connecting parts. 2.
BTP-R880NP User’s Manual Contents 1．INTRODUCTION .......................................................................................................................................... 1 TU UT 1.1 OUTLINE ..................................................................................................................................................... 1 TU UT 1.2 FEATURES ................................................................................................................................
BTP-R880NP User’s Manual 6.4 ETHERNET INTERFACE ............................................................................................................................... 16 TU UT 6.5 WLAN INTERFACE .................................................................................................................................... 17 TU UT 6.6 POWER INTERFACE DEFINITION .................................................................................................................. 18 TU UT 6.
BTP-R880NP User’s Manual 1．Introduction 1.1 Outline BTP-R880NP is a high performance thermal printer, which can be widely used for real-time printing application, such as POS system, restaurant system, ATM, etc. BTP-R880NP can be connected with other devices via parallel interface, serial interface, USB, Ethernet or WIFI and is available for WINDOWS 2000/XP/Server 2003/VISTA/WIN7/ Server2008, Linux and MAC. 1.
BTP-R880NP User’s Manual 2．Specifications 2.1 Main specification Item Specification Color Black or Ivory Print Method Direct Thermal Resolution 203 × 180 DPI(standard) Paper width 57.5/69.5/76/80/82.5mm Print width Max. 80mm Standard: Max 230mm/s Printing Gray scale print speed:Max.150mm/s Print speed Bi-colour print speed: Max. 120mm/s Flash capability 2M / 4M (selectable, according to different font library) Flash LOGO Max.
BTP-R880NP User’s Manual Machine Button FEED button Interface LED POWER LED, ERROR LED Buzzer Built-inInternal Buzzer, the volume can be adjusted. Lifetime of print head 150 km(standard test condition) Lifetime of cutter 1,800,000 cuts(standard test condition) MCBF 60,000,000 lines MTBF 360,000 hours Reliability Operation condition 5°C to 45°C, 20% to 90%RH (40°C) Storage condition -40°C to 60°C, 20% to 93%RH (40°C) Dimension 200 L x 145 W x 145 H (mm) Weight Functions Approx 1.
BTP-R880NP User’s Manual z Paper type: Continuous thermal paper z Paper supply method: Paper roll z Paper width: 82.5±0.5mm,80±0.5mm, 76±0.5 mm,69.5±0.5mm z Paper thickness: 0.06mm-0.1mm z Thermal senstive layer: Outside z Paper roll specifications OD(MAX):ф83mm z Recommended reference paper: Paper type 57±0.5mm Manufacturer TF50KS-E2C,TF50KS-E Nippon Paper Industries Co., Ltd. F70NA FUJI PHOTO FILM Co., Ltd. F240AC/F220-VP, Mitsubishi Paper Mill Co., Ltd.
BTP-R880NP User’s Manual Caution: The printer will measure the marks during the printing or feeding process. If the lengths of the mark (L1) is larger than the default value (default: 13mm), the printer will give a paper-end alarm. 2.4 Print and tear off position 2.4.1 Print position z L1: Paper holder width: 83.5±0.5mm z L2:Max Print width: 80mm z L3: Distance between left end of print-head and left side of paper house (Fixed) 1.
BTP-R880NP User’s Manual 3 Outline and components 3.1 Outline and Parts 1—Power LED 2—Error LED 3—Feed button 4—Tear bar 5—Top cover latch 6—Cutter cover 7—Middle cover 8—Power switch 9—Top cover 10—LOGO plate 11—Top cover 12—Top-cover-open sensor 13—Paper sensor 14—Paper guide 15—Paper near-end sensor 16—Printer platen 17—Power connector 18—Cash drawer connector 19—USB connector 20—Interface connector Functions of parts: a- Power Indicator (1) Indicating power status (ON/OFF).
BTP-R880NP User’s Manual d- Power switch (8) “O” power is to turn off printer. “—” power is to turn on printer. e- Top cover uplifting alarm sensor Monitor top cover status: open/close. f- Paper end sensor To detect if paper is existing or not when using continuous paper; To detect the paper mark when using black mark paper. g- Paper guide (14) There are 4 long slots in paper house bottom. Paper house width can be adjusted to below different value by inserting paper guide into different slots:82.5 ±0.
BTP-R880NP User’s Manual 4 Installation 4.1 Unpacking Check whether all items, which are listed on the packing list, are present and in a good condition. If any item is damaged or missing, please contact your dealer. 4.2 Printer installation The BTP-R880NP can be installed in two positions: horizontally on a table or vertically on a wall. 1. Horizontally on a table 2.
BTP-R880NP User’s Manual 4.3 Connecting the Power Adapter 1) Confirm the power switch is turned off. 2) Insert the power cord into the power socket on the back of the printer. Caution: Use only the manufacturers supplied power adapter or other equal model. When connecting or disconnecting the cable connector of the power adapter, always hold the connector but not the cable.
BTP-R880NP User’s Manual 1) Turn off the printer. 2) Open the printer top cover, as in the following figure. 3) Drop in a paper roll in the paper house. 4) Pull the paper roll into the paper holder, and close the printer top cover. 5) Tear off the surplus portion of the paper by using the tear bar.
BTP-R880NP User’s Manual Paper guide in the slot 3&4: 57 ±0.5mm Confirm that the paper is rolled tightly on the paper roll, otherwise, paper jam or other fault may occur. The paper roll should be placed straight in the paper compartment and not at an angle. The paper roll should be able to move freely. 4.8 Paper near end adjustment 4.8.1 Paper near end position adjustment BTP-R880NP supports printing both in horizontal and vertical positions.
BTP-R880NP User’s Manual 4.8.2 Remaining paper amount adjustment of Paper near end sensor Remaining paper amount can be adjusted by adjusting the position of paper near end sensor Paper near end sensor has six levels, the red mark (actual color on printer is white) shows the current level and it can be adjusted to a different position by moving the click-wheel. 4.9 Power on printer and print self-test page 4.9.1 Power on printer Confirm that the printer is connected to power. 4.9.
BTP-R880NP User’s Manual 5 Printer maintenance Caution: Before starting routine maintenance, confirm that the printer power is turned off. Do not use solvents like gasoline or acetone. When cleaning sensors, the printer should not be switched on until the pure alcohol has totally evaporated. It is recommended that the maintenance cycle should not be longer than one month. 5.
BTP-R880NP User’s Manual Caution: The cutter sliding blade acts slowly during revolving the thumb wheel. Go on revolving and observe carefully; If the thumb wheel cannot be turned, do not force the wheel, instead turn it the opposite direction.
BTP-R880NP User’s Manual 6 Interface Signal 6.1Parallel interface Parallel interface can work in IEEE 1284 compatible mode or half-byte mode. The interface is 36PIN CENTRONICS.
BTP-R880NP User’s Manual 6.2 RS-232 serial interface The serial interface of the printer is compatible with RS-232, its connector is 25PIN female D type. PIN No. Signal definition PIN1 Frame Ground PIN2 TXD PIN 3 RXD PIN 4 RTS PIN 5 Not connected PIN6 DSR PIN 7 Signal Ground PIN 8~19 Not connected PIN 20 DTR PIN 21~25 Not connected User can query interface settings status via printing self-test page.
BTP-R880NP User’s Manual ¾ Supports status back ¾ Supports parameter configuration ¾ Supports firmware update on-line ¾ Supports printer status query and interface module maintenance based on HTTP(only JK-E02 interface supports, while JK-E04 interface does not support) 2) Interface signal definition Interface adopts 10BASE-T standard in accordance with IEEE802.3.
BTP-R880NP User’s Manual requested from the local distributor or manufacture. 6.6 Power interface definition Power supply interface signal definition PIN Signal Name 1 E 2 L 3 N Power socket 24V power interface definition PIN Signal Name 1 E 2 L 3 N 6.7 Cashdrawer interface signal definition 1) Electrical features ¾ Driving voltage: DC 24 V ¾ Driving current: Max. 1 A ¾ Cash drawer status inspection signal: “L” = 0～0.5 V “H” = 3.
BTP-R880NP User’s Manual 7 Troubleshooting In case of printer fault, consult this section for solutions and advice. If you do not find a solution in this section, please contact your local dealer for assistance. 7.1 Printer doesn’t work Problems Possible causes LED is off and the printer doesn’t work Solution Printer has no power supply Connect the printer power Printer power is off Turn on the printer power Contact your local dealer. or Circuit is damaged manufacturer 7.
BTP-R880NP User’s Manual 8. Accessories 8.1 Spill proof cover 8.2 HERALD – kitchen alarm system 8.3 Power Supply CASE This cover is used to install the AC power adapter under the printer; so that the power adapter would become an internal part of the printer (the power adapter will be inside of the printer). 8.
BTP-R880NP User’s Manual 2) Insert the plastic plugs in the holes and make sure that the plugs are fully inside the holes and do not stick out. 3) Screw the two screws in the plastic plugs and keep10mm space between the screw head and the wall surface. 4) Regulate the paper near end sensor (Please refer to 3.4.1) ,)Mount, Mount the printer as figure.
BTP-R880NP User’s Manual 8.
BTP-R880NP User’s Manual 9. Power Management The power management of BTP-R880NP has four operation modes: Ready, Active, Sleep, Off. 1. Printer will enter into Ready mode after powering on printer or completing printing job. 2. Printer will enter into Sleep mode if there is not any printing job for 5 minutes in Ready mode. 3. Printer will awake automatically and enter into Active mode when printing job comes, and will enter into Ready mode again after completing printing job.
BTP-R880NP User’s Manual APPENDIX A: Configuration setting function Parameter setting (configuring) by Feed button 1) Hold the FEED button pressed while switching the printer on. 2) After the printer has printed the configuration sheet, press and hold the FEED button to configure the printer. The main menu for the key-stroke setting procedure is printed. 3) The procedure consists of several sub-menus and step-by-step working is needed.
BTP-R880NP User’s Manual PARAMETER SETTING BY FEED BUTTON MAIN MENU Exit ->1 Print Self Test ->2 Configuration ->3 CONFIGURATION Exit Without Save ->1 Exit With Save ->2 Communication ->3 Back To Last ->1 Menu USB Interface ->2 USB MODE:API MODE Back To Last ->1 Menu Serial Interface ->3 WinDriver Mode ->2 API Mode ->3 SERIAL INTERFACE Back To Last ->1 Menu Baud Rates ->2 BAUD RATES:19200bps Back To Last Menu Parity Data Bits Stop Bit(s) ->3 ->4 ->5 9600bps ->2 19200bps
BTP-R880NP User’s Manual Print '?' Rx Buff Size ->4 RX BUFFER SIZE:4K Bytes Back To Last ->1 Menu 4k Bytes Mechanism & ->4 ->2 45 Bytes ->3 64K Bytes ->4 HARDWARE SETTINGS Hardware Back To Last ->1 Menu Mark Sensor ->2 MARK SENSOR: Disable Back To Last ->1 Menu Cutter ->3 Enable ->2 Disable ->3 CUTTER: Enable Back To Last ->1 Menu Buzzer ->4 Enable ->2 Disable ->3 BUZZER: Normal Volume Back To Last ->1 Menu Power Supply ->5 Low Volume ->2 Normal Volume ->3 High Vo
BTP-R880NP User’s Manual 82.
BTP-R880NP User’s Manual Gray Scale Mode ->10 Gray Scale Mode:Mode3 Back To Last ->1 Menu Paper Sensor ->6 Settings Mode 0 ->2 Mode 1 ->3 Mode 2 ->4 Mode 3 ->5 Mode 4 ->6 Mode 5 ->7 Mode 6 ->8 Mode 7 ->9 PAPER NEAR END SETTINGS Back To Last ->1 Menu Paper Low Alarm ->2 PAPER LOW ALARM: Enable Back To Last ->1 Menu Stop Print When ->3 PAPER Low Enable ->2 Disable ->3 STOP PRINT WHEN PAPER LOW: Disable Back To Last ->1 Menu Paper Near End ->4 Sensor Enable ->2 D
BTP-R880NP User’s Manual Select ->5 UDFONTB Beep settings ->9 Beep settings: Disabled Back To Last ->1 Menu Enable External ->2 Herald Enable Internal ->3 BEEP MODE buzzer Back To Last ->1 Menu All Beep disabled Set Printer Mode ->10 ->4 Printer Mode:BTP-880NP Mode Back To Last ->1 Menu BTP-880NP ->2 Mode BTP-2002NP ->3 Mode Enter code, then hold Button Down at least 1 second to validate Cutter Test ->4 Sensor Test ->5 Sensor Test Mode: ERROR LED state will change according to sen
