World K Series RoHS-Compliant Induction Motors 1W / 3W 6W 왎Features 쎲 Optimal for Uni-Directional Continuous Operation Induction motors are optimal for uni-directional continuous operation such as a conveyor system. 왎Safety Standards and CE Marking Standards 15 W UL 1004 UL 2111 CSA C22.2 No.100 CSA C22.2 No.77 Certification Body UL Standards File No.
Right-Angle Gearheads (Sold separately) Equipped with instantaneous stopping functions, thermal protector open detection functions. (➜ Page 108) (➜ Page 114) Flexible Couplings (Accessories) Mounting Brackets (Accessories) Brake Pack SB50W (Sold separately) World K Series 왎System Configuration Induction Motors (➜ Page 123) (➜ Page 121) 2-Pole, High-Speed Type Motor AC Power Supply Capacitor Cap✽ (Included) Insulating cap for capacitor terminal section.
World K Series 왎General Specifications of Motors 쎲 1 W, 3 W Type Item Specifications 1W / 3W Insulation Resistance 100 M⍀ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. Dielectric Strength Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity.
World K Series Induction Motors 1W / 3W Frame Size: 42 mm 왎Specifications – Continuous Rating Model Lead Wire Type Pinion Shaft Type Round Shaft Type 0IK1A-AW2J Voltage Frequency VAC Hz 50 60 Single-Phase 100 0IK1A-AW3U 1 Single-Phase 110 Single-Phase 115 0IK1GN-CW2J 0IK1A-CW2J 0.8 1 Single-Phase 200 0IK3GN-BW2J 0IK3A-BW2J 3 Single-Phase 100 0IK3GN-BW3U 0IK3A-BW3U 3 Single-Phase 110 Single-Phase 115 60 0IK3GN-DW2J 0IK3A-DW2J 2.
World K Series 왎Gearmotor – Torque Table 쎲Gearheads are sold separately. Decimal gearheads are not available. 쎲Enter the gear ratio in the box ( ) within the model name. indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite 쎲A colored background direction. 쎲The speed is calculated by dividing the motor's synchronous speed (4-pole type; 50 Hz: 1500 r/min, 60 Hz: 1800 r/min, 2-pole type; 50 Hz: 3000 r/min, 60 Hz: 3600 r/min) by the gear ratio.
A Model 4.3 4.5 B B⫹10 Pinion Shaft Type 0IK1GN-AW2J 0IK1GN-AW3U 0IK1GN-CW2J 0IK3GN-BW2J 0IK3GN-BW3U 0IK3GN-DW2J 20 6 A B C 31 31 31 31 31 31 14.5 14.5 17 14.5 14.5 17 23.5 23.5 27 23.5 23.
World K Series Induction Motors 6W Frame Size: 60 mm 1W / 3W Lead Wire Type Terminal Box Type 6W (Gearhead sold separately) 왎Specifications – Continuous Rating 15 W Model Upper Model Name: Pinion Shaft Type Lower Model Name ( ): Round Shaft Type 25 W 40 W Output Power Voltage Frequency Terminal Box Type Dimension 햳 W VAC Hz A mN m 2IK6GN-AW2J (2IK6A-AW2J) 2IK6GN-AW2TJ (2IK6A-AW2TJ) 6 Single-Phase 100 50 60 2IK6GN-AW2U (2IK6A-AW2U) 2IK6GN-AW2TU (2IK6A-AW2TU) 6 Single-Phase 110 Si
앳 50 Hz Unit = N m 500 416 300 250 200 166 Motor/ Gearhead Gear Ratio 3 3.6 5 6 7.5 9 J 2IK6GN-AW2m J 2IK6GN-CW2m E 2IK6GN-CW2 2IK6GN-SW2 2GN S 120 100 83 60 50 41 30 25 20 16 15 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 0.12 0.14 0.20 0.24 0.30 0.36 0.50 0.60 0.71 0.89 1.1 1.3 1.6 1.9 2.4 2.9 3 12.5 3 3 8.3 3 Unit = N m Model Speed r/min 600 500 360 300 240 200 Motor/ Gearhead Gear Ratio 3 3.6 5 6 7.
Mass: Motor 0.9 kg Gearhead 0.4 kg Motor Model 32 12 1W / 3W 62 5 60 4⫻4.5 Thru 2GN S Gear Ratio L1 3 18 30 25 180 40 쎲 Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name. Enter the gear ratio in the box ( ) within the model name. 0.5 70⫾ 60 L1 7 10 24 115 46.5 32 max. Gearhead Model 2IK6GN-AW2T 2IK6GN-CW2T 2IK6GN-SW2T 7 0 8⫺0.015 (h7) World K Series 앳 Terminal Box Type 햳 91.
쎲The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction. 쎲Connection diagrams are also valid for the equivalent round shaft type. 쎲Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name.
World K Series Induction Motors 15 W Frame Size: 70 mm 1W / 3W (Gearhead sold separately) 6W 왎Specifications – Continuous Rating Model Lead Wire Type Pinion Shaft Type 3IK15GN-AW2J 15 W 3IK15GN-AW2U Output Power Voltage Frequency Round Shaft Type W VAC 3IK15A-AW2J 15 Single-Phase 100 Hz 50 60 15 Single-Phase 110 Single-Phase 115 3IK15A-AW2U 3IK15GN-CW2J 3IK15A-CW2J 15 3IK15GN-CW2E 3IK15A-CW2E 15 Single-Phase 200 Single-Phase 220 Single-Phase 230 60 25 W 50 60 50 60 50 60 Cur
앳 50 Hz Unit = N m Speed r/min 500 416 300 250 200 166 Motor/ Gearhead Gear Ratio 3 3.6 5 6 7.5 9 3IK15GN-AW2J 3IK15GN-CW2J 3IK15GN-CW2E 3GN S 120 0.30 0.36 0.51 0.61 0.76 0.91 100 83 60 50 41 30 25 20 16 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 1.8 2.3 2.7 3.3 4.1 5 5 1.3 1.5 5 15 5 12.5 5 앳 60 Hz 10 5 8.3 5 2-Pole, High-Speed Type Model Induction Motors 쎲Gearheads and decimal gearheads are sold separately.
앳 Decimal Gearhead The mass and motor's dimensions (excluding the shaft section) are the same as those of the pinion shaft type. Can be connected to GN pinion shaft type. 3GN10XS Mass: 0.3 kg 4⫻5.5 Thru 43 30 13 2 4⫻5.5 Thru 0.5 82 ⫾ Protective Earth Terminal M4 64⫺0.030 (h7) 70 70 1W / 3W 0 64⫺0.030 (h7) 0 32 2 6⫺0.012 (h7) 5 max. 0.5 82⫾ 0 World K Series 앳 Shaft Section of Round Shaft Type 22.5˚ 6W 앳 Capacitor (Included with single-phase motors) B B⫹10 4.
World K Series Induction Motors 25 W Frame Size: 80 mm 2-Pole, High-Speed Type Lead Wire Type Terminal Box Type Induction Motors Right-angle gearheads (hollow shaft or solid shaft) can be combined. Right-Angle Gearheads ➜ Page 108 (Gearhead sold separately) Model Upper Model Name: Pinion Shaft Type Lower Model Name ( ): Round Shaft Type Voltage Frequency W VAC Hz A mN m 4IK25GN-AW2J 4IK25GN-AW2TJ (4IK25A-AW2J) (4IK25A-AW2TJ) 25 Single-Phase 100 50 60 0.51 0.
World K Series 왎Gearmotor – Torque Table 1W / 3W 쎲Gearheads and decimal gearheads are sold separately. ) within the model name. 쎲Enter the code that represents the terminal box type "T" in the box ( 쎲Enter the gear ratio in the box ( ) within the model name. 쎲A colored background indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite direction.
Mass: Motor 1.7 kg Gearhead 0.65 kg 5.5 62 43 Gearhead Model Gear Ratio L1 3 18 32 4GN S 25 180 42.5 쎲 Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name. Enter the gear ratio in the box ( ) within the model name. 0.5 94 앳 Key and Key Slot 32 0 0 4⫺0.03 ⫹0.040 0 4 2.5 L1 4⫺0.03 85 25⫾0.2 4 5.5 Thru 80 6 2-Pole, High-Speed Type 7 ⫹0.
World K Series 왎Connection Diagrams 쎲The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction. 쎲Connection diagrams are also valid for the equivalent round shaft type. 쎲Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name.
World K Series Induction Motors 40 W Frame Size: 90 mm 2-Pole, High-Speed Type Lead Wire Type Terminal Box Type (Gearhead sold separately) Induction Motors Right-angle gearheads (hollow shaft or solid shaft) can be combined.
World K Series 왎Gearmotor – Torque Table 1W / 3W 쎲Gearheads and decimal gearheads are sold separately. ) within the model name. 쎲Enter the code that represents the terminal box type "T" in the box ( 쎲Enter the gear ratio in the box ( ) within the model name. 쎲A colored background indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite direction.
Mass: Motor 2.6 kg Gearhead 1.5 kg Motor Model Gearhead Model 5IK40GN-AW2T 5IK40GN-CW2T 5IK40GN-SW2T 5IK40GN-UT4 5GN□S Gear Ratio L1 3 18 42 25 180 60 World K Series 앳 Terminal Box Type 햳 쎲 Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name. Enter the gear ratio in the box ( ) within the model name. 62 4 L1 32 ⫹0.1 0 2.5 4 0 43 4⫻6.5 Thru 0.5 104⫾ ⫹0.040 0 0 4⫺0.03 90 25 89 18 36 25⫾0.
World K Series 왎Connection Diagrams 쎲The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction. 쎲Connection diagrams are also valid for the equivalent round shaft type. 쎲Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name.
World K Series Induction Motors 60 W Frame Size: 90 mm 2-Pole, High-Speed Type Lead Wire Type Terminal Box Type (Gearhead sold separately) Model Upper Model Name: Pinion Shaft Type Lower Model Name ( ): Round Shaft Type Voltage Frequency Terminal Box Type Dimension 햳 W VAC Hz A 5IK60GE-AW2TJ (5IK60A-AW2TJ) 60 Single-Phase 100 50 60 5IK60GE-AW2U 5IK60GE-AW2TU (5IK60A-AW2U) (5IK60A-AW2TU) 60 Single-Phase 110 Single-Phase 115 60 5IK60GE-CW2J (5IK60A-CW2J) 5IK60GE-CW2TJ (5IK60A-CW2TJ)
World K Series 왎Gearmotor – Torque Table 1W / 3W 쎲Gearheads and decimal gearheads are sold separately. ) within the model name. 쎲Enter the code that represents the terminal box type "T" in the box ( 쎲Enter the gear ratio in the box ( ) within the model name. 쎲A colored background indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite direction.
World K Series 앳 Terminal Box Type 햳 Mass: Motor 2.8 kg Gearhead 1.5 kg 62 4⫻6.5 Thru 38 0 3 5 ⫹0.1 0 5⫺0.03 5⫺0.03 90 0 90 .5 04⫾0 1 ⫹0.040 0 0 25⫾0.2 90 쎲 Use cable with a diameter of 6 12 mm. 앳 Decimal Gearhead The mass and motor's dimensions (excluding the shaft section) are the same as those of the pinion shaft type. Can be connected to GE pinion shaft type. 37 5GE10XS Mass: 0.6 kg 4⫻6.5 Thru 61 40 0.5 4⫻10.
World K Series 왎Connection Diagrams 쎲The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction. 쎲Connection diagrams are also valid for the equivalent round shaft type. 쎲Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name.
World K Series Induction Motors 90 W Frame Size: 90 mm 2-Pole, High-Speed Type Lead Wire Type Terminal Box Type Induction Motors Right-angle gearheads (hollow shaft or solid shaft) can be combined.
World K Series 왎Gearmotor – Torque Table 1W / 3W 쎲Gearheads and decimal gearheads are sold separately. ) within the model name. 쎲Enter the code that represents the terminal box type "T" in the box ( 쎲Enter the gear ratio in the box ( ) within the model name. indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite 쎲A colored background direction.
World K Series 앳 Terminal Box Type 햳 Mass: Motor 3.3 kg Gearhead 1.5 kg 62 90 7 65 43 4⫻6.5 Thru 38 3 ⫹0.1 0 ⫹0.040 0 5 0 0.5 104⫾ 0 5⫺0.03 90 쎲 Use cable with a diameter of 6 12 mm. 앳 Decimal Gearhead The mass and motor's dimensions (excluding the shaft section) are the same as those of the pinion shaft type. Can be connected to GE pinion shaft type. 37 5GE10XS Mass: 0.6 kg 4⫻6.5 Thru 61 40 0.5 4⫻10.8 Thru 21 2 Protective Earth Terminal M4 (Lead Wire Type Only) 5 104⫾0.
World K Series 왎Connection Diagrams 쎲The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction. 쎲Connection diagrams are also valid for the equivalent round shaft type. 쎲Specify the type of the capacitor to be included by entering J, U or E in the box ( ) within the model name.
World K Series RoHS-Compliant Brake Pack for Standard AC Motors SB50W The SB50W provides instantaneous stop, forward/ reverse operation, electromagnetic brake control and thermal protector open detection functions integrated into one unit. These brake packs can sense when the thermal protector is opened, further ensuring the safety of your equipment.
World K Series 왎System Configuration Mounting Brackets (Accessories) Flexible Couplings (Accessories) (➜ Page 123) (➜ Page 121) Programmable Controller AC Power Supply Gearhead (Sold separately) Flush Mounting Socket (Included with brake pack) Capacitor Cap✽ (Included with motor) Insulating cap for capacitor terminal section. ✽For motors other than those recognized by standards, the cap is sold separately.
World K Series 왎Dimensions (Unit = mm) 앳 Flush Mounting Socket (Included with brake pack) 앳 SB50W Mass: 0.1 kg 50 max. 40 0.2 70.5 5.5 앳 Flush Mounting Socket Panel Cut-Out 2 4.5 Mounting Holes 31.2 max. 1.2 5 0.7 4 11 M3.5 Screws 35.4 70 max. 40 0.2 9.5 䡺48 䡺44.6 2 4.5 3 7.8 4.5 왎Braking Characteristics (Reference Values) 쎲 Induction Motors 1W 6W 1.5 1.0 50 Hz 60 Hz 1.5 0 25 W 0.025 0.050 0.075 Load Inertia 0.100 0.125 0.2 0.3 Load Inertia 0.4 0.5 0.6 90 W 2.0 1.
6W 1.0 50 Hz 60 Hz 1.0 0.5 50 Hz 60 Hz 0 0.005 0.010 0.015 0.020 0.025 0.030 Load Inertia Overrun [Rotations] Overrun [Rotations] 1.5 1.5 0.050 0.075 Load Inertia 0.100 0.125 50 Hz 60 Hz 0 40 W 50 Hz 60 Hz 0.1 0.2 0.3 Load Inertia 0.4 0.5 0.6 0.20 0.25 60 W Overrun [Rotations] 0.5 0.10 0.15 Load Inertia 1.5 50 Hz 60 Hz 1.0 0 0.25 0.50 0.75 Load Inertia 1.0 1.5 50 Hz 60 Hz 1.0 0 1.25 0.5 1.0 Load Inertia 1.5 2.0 Reversible Motors Overrun [Rotations] 1.0 0.05 2.0 2.
World K Series 왎Connection and Operation 쎲 Names and Functions of Brake Pack Parts No. r q w Lit when 24 VDC is supplied. 햳 ALARM Indicator (Red) − Lit when the ALARM output is "OFF." 햴 Motor Output Select Switch 60 90 W 햵 SINK/SOURCE Select Switch SINK 앳 Induction Motors/Reversible Motors Black 7 9 ON Motor 1 11 Capacitor 6 8 5 4 ON 2 Capacitor 24 VDC CW Operation Input CCW Operation Input Brake Release Input GND 24 VDC 0.1 A min.
쎲 Timing Chart The I/O signal circuit can be switched between the sink mode and source mode using the sink/source select switch on the brake pack. The factory setting is the sink mode. 앳 Sink Logic Braking DC Power Supply CW Operation Input✽1 Brake Pack CCW Operation Input✽1 ✽1 •Output Circuit Brake Pack 4.
World K Series 앳 ALARM Output (Thermal Protector Open Detection) Since the SB50W ALARM output function detects the operations of the thermal protector, the current flowing in the motor is monitored.
World K Series Accessories 왎Motor/Gearhead Mounting Brackets 2-Pole, High-Speed Type Please note that these mounting brackets cannot be used with the following products. 쎲 Right-angle gearheads (RH type, RA type) Reversible Motors 왎For Motor Frame Size: 䡺42 mm 쎲 Model: SOL0M3 쎲 Dimensions (Unit = mm) Mass: 85 g Material: Aluminum 14 20 9 7.4 56 44 6 20 3 40⫾0.5 41 62 1 8 37.6 36 0.3 4⫻M3 48 ⫾ Electromagnetic Brake Motors 0GN Gearhead Motor with the flame size of 䡺42 mm 21 4.
쎲 Model: SOL3M5 쎲 Dimensions (Unit = mm) Mass: 175 g Material: Aluminum 30 8.4 1.5 3GN Gearhead Motor with the flame size of 䡺70 mm 16 앳 Applicable Products 36 5.4 103 35 10 World K Series 왎For Motor Frame Size: 䡺70 mm 88 72 7 23 3 64 60 1 8 55⫾0.5 60.5 92 82 ⫾ 0.3 4⫻M5 118 55 왎For Motor Frame Size: 䡺80 mm 쎲 Model: SOL4M5 쎲 Dimensions (Unit = mm) Mass: 210 g Material: Aluminum 5.4 112 40 41 8.4 16 1.
Insulating cap for capacitor terminal section. (Example of use) External Dimensions A⫻B (Unit ⫽ mm) Applicable Capacitor Model CHC5835AUL 58⫻35 CH400300A B Model World K Series 왎Capacitor Cap A 2-Pole, High-Speed Type Use a capacitor cap suitable for the external dimensions (A⫻B) of the capacitor. Material: Polyvinyl chloride Our capacitor caps are recognized by UL. UL File No.
This product is manufactured at a plant certified with the international standards ISO 9001 (for quality assurance) and ISO 14001 (for systems of environmental management). Specifications are subject to change without notice. This catalogue was published in July, 2006. ORIENTAL MOTOR (EUROPA) GmbH ORIENTAL MOTOR (UK) LTD. ORIENTAL MOTOR ITALIA s.r.l. www.orientalmotor.de European Headquarters and Düsseldorf Office Schiessstraße 74 40549 Düsseldorf, Germany Tel: 0211-5206700 Fax: 0211-52067099 www.