Datasheet

22
Lead Wire Type
햲
Mass: Motor 1.5 kg
Gearhead 0.65 kg
4

5.5 Thru

79
L1
85
32
6
9
4

0
.
5
7
25
34
15
80
Motor Leads 300 mm Length
UL Style 3271, AWG20
80
22
.5˚

10
0.015
(
h7
)
0
5 max.
Protective Earth Terminal
M4
앳
Gearmotor – Torque Table
Gearheads and decimal gearheads are sold separately.
Enter the code that represents the terminal box type "T" in the box (

) within the model name.
Enter the gear ratio in the box (

) within the model name.
A colored background indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite
direction.
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2 - 20% less than the displayed value, depending on the size of the load.
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio: 10) between the gearhead and the motor.
In that case, the permissible torque is 8 N

m. When a gearhead of 1/25

1/36 is connected, the value for permissible torque is 6 N

m.
50 Hz Unit = N

m
Model
Speed
r/min
500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Motor/
Gearhead
Gear Ratio
33.65 67.59
12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
4IK25GN-AW2

J
4IK25GN-CW2

J
4IK25GN-CW2

E
4GN

S
0.500.600.831.01.21.52.12.53.03.74.55.46.88888888
4IK25GN-SW2

4IK25GN-UT4
4GN

S
0.460.550.770.921.21.41.92.32.83.54.25.06.37.5888888
60 Hz Unit = N

m
Model
Speed
r/min
600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Motor/
Gearhead
Gear Ratio
33.65 67.59
12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
4IK25GN-AW2

J
4IK25GN-AW2

U
4IK25GN-CW2

J
4IK25GN-CW2

E
4GN

S
0.410.500.690.831.01.21.72.12.53.13.74.55.66.7888888
4IK25GN-SW2

4GN

S
0.390.470.650.780.971.21.61.92.32.93.54.25.36.37.988888
Permissible Overhung Load and Permissible Thrust Load
Motor (Round shaft type) ➜ Page 107
Gearhead ➜ Page 107
Permissible Load Inertia J for Gearhead
➜ Page 107
Dimensions (Unit = mm)
Mounting screws are included with gearheads.
왎
쎲
쎲
쎲
쎲
쎲
쎲
앳
앳
왎
왎
왎
Motor Model Gearhead Model Gear Ratio L1
4IK25GN-AW2

4IK25GN-CW2

4IK25GN-SW2
4GN

S
3

18
32
25

180
42.5
Specify the type of the capacitor to be included by entering J, U or E in the box (

) within
the model name.
Enter the gear ratio in the box (

) within the model name.
16.5
21.5
Detail Drawing of Protective Earth Terminal
Protective Earth Terminal
M4
쎲
World
K
Series
1 W / 3 W 6 W 15 W 25 W 40 W 60 W 90 W
2-Pole, High-Speed
40 W

150 W