User's Manual

— 1 —
1. Requirement of FCC KDB 996369 D03 for module
certification:
1.1 List of applicable FCC rules:
The module complies with FCC Part 15.249.
FCC ID: 2AS3D-C2ME24MPA on User manual and on the external of the packaging.
1.2 Summarize the specific operational use conditions:
The module has been certified for Potable applications. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
1.3 Limited module procedures:
The module has not its own RF shielding, which belong to Limited module Standard requires:
Clear and specific instructions describing the conditions, limitations and procedures for third-
parties to use and/or integrate the module into a host device (see Comprehensive
integration instructions below).
Resolve: Supply example as follows:
Installation Notes:
1) C2Me24MPA module Power supply range is DC 2.0~3.6V, when you use C2Me24MPA
module design product, the power supply cannot exceed this range.
2) When connect C2Me24MPA module to the host device, the host device must be power
off.
3) Make sure the module pins correctly installed.
4) Make sure that the module does not allow users to replace or demolition
1.4 Trace antenna designs:
Not applicable.
1.5 RF exposure considerations:
This equipment complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s) used for this transmitter must not be collocated or operating
in conjunction with any other antenna or transmitter.