Installation Guide

ManualsBrandsOrigin 21 ManualsCeiling LightsLynnpark 11.95-in Matte Black Modern/Contemporary Flush Mount Light

LED FLUSHMOUNT

CEILING FIXTURE

VR20178

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could

also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

Purchase Date

ITEM #0760101

2806787

MODEL #CLL11BNK

CLL11MBK

Français p. 9

Español p. 17

ATTACH YOUR RECEIPT HERE

Summary of content (8 pages)

PAGE 1
welcoming • sophisticated • inspiring ITEM #0760101 2806787 allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. LED FLUSHMOUNT CEILING FIXTURE MODEL #CLL11BNK CLL11MBK Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.
PAGE 2
TABLE OF CONTENTS Package Contents ..............................................................................................................2 Hardware Contents ........................................................................................................................ 2 Safety Information ...............................................................................................................3 Preparation ................................................................................
PAGE 3
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to fire, electrical shock or other injuries that could be hazardous or even fatal. • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding.
PAGE 4
SAFETY INFORMATION Modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 5
ASSEMBLY INSTRUCTIONS 1. Turn off circuit breakers and wall switch to the fixture supply line leads. 1 DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death. 2. Remove existing fixture and disconnect all electrical wiring. ON ON OFF OFF 2 Outlet Box 3. Remove mounting plate (B) from fixture (A) by removing mounting plate screws (C) from the edges of the fixture (A). 3 B Save mounting plate screws (C) for later use.
PAGE 6
ASSEMBLY INSTRUCTIONS 4. Attach mounting plate (B) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding. Tighten machine screws (BB) to secure mounting plate (B). 4 Outlet Box B CAUTION: The fixture must be mounted to an outlet box that is supported by the building structure.
PAGE 7
ASSEMBLY INSTRUCTIONS 6. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire. Push wire connectors (AA) gently back into outlet box. Carefully push excess wiring into outlet box. 6 Outlet Box AA WARNING: Make sure no bare wire or wire strands are visible after making connections. AA A 7. Attach fixture (A) to mounting plate (B) using the mounting plate screws (C) that were previously removed (Step 3, Page 5). AA 7 B C 8.
PAGE 8
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner. • Total wattage for this fixture is 20.84 watts. Do not attempt to replace the LED. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Light does not come on initially or no longer comes on. 1. Power is OFF. 2. Faulty connection. 3.