Installation Guide

ASSEMBLY INSTRUCTIONS
6
Attach mounting plate (B) to outlet box
(not included) using existing washers and outlet
box screws or the machine screws (BB). NOTE:
If the outlet box screws required for your outlet
box are of a different size than the machine
screws (BB), consult a licensed electrician before
proceeding. Tighten machine screws (BB) to
secure mounting plate (B).
CAUTION: The fixture must be mounted to
an outlet box that is supported by the building
structure. Plastic outlet boxes are not
recommended.
4.
Hardware Used
Machine Screw
x 2
BB
4
Outlet
Box
BB
BB
B
5.
Unwrap BARE fixture wire from BLACK and WHITE
fixture wires. Prepare wires by stripping 3/4 in. of
insulation from wire ends using wire strippers (not
included). Connect WHITE wire from fixture (A) to
WHITE wire from outlet box using existing wire
connector or wire connector (AA). Connect BLACK
wire from fixture (A) to BLACK wire from outlet box
using existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet box
to BARE ground wire from fixture (A) with wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the corresponding
fixture lead wires, consult an electrician for the
proper size wire connectors to use.
Hardware Used
Wire Connector
x 3
AA
4
5
Outlet Box
BLACK
WHITE
A
AA
AA
BARE/
GREEN
AA