User`s manual

Chapter 2: Hardware Installation

Overview

Your Thecus IP storage is designed for easy installation. To help you get started, the

following chapter will help you quickly get your Thecus IP storage up and running.

Please read it carefully to prevent damaging your unit during installation.

Before You Begin

Before you begin, be sure to take the following precautions:

1. Read and understand the Safety Warnings outlined in the beginning of the

manual.

2. If possible, wear an anti-static wrist strap during installation to prevent static

discharge from damaging the sensitive electronic components on the IP

STORAGE.

3. Be careful not to use magnetized screwdrivers around the Thecus IP

storage’s electronic components.

Hard Disk Installation

N0204:

The N0204 miniNAS supports two standard 2.5” Serial ATA (SATA) hard disks. To

install a hard disk into the N0204 miniNAS, follow the steps below:

1. Open 2.5” HDD tray from N0204 miniNAS, as the following chart.

Push down

Push up