User`s manual

Sort Descending Shows logs by date in descending order.

|<< < > >>| Use the forward ( > >>| ) and backward ( |<< < ) buttons to

browse the log pages.

Refresh the logs.

System Management

The System Management menu gives you a wealth of settings that you can use to

configure your Thecus IP storage system administration functions. You can set up

system time, system notifications, and even upgrade firmware from this menu.

Time: Setting system time

From the time menu, choose the Time item and the Time screen appears. Set the

desired Date, Time, and Time Zone. You can also elect to synchronize the system

time on the IP STORAGE with an NTP (Network Time Protocol) Server.

See the following table for a detailed description of each item:

Time

Item Description

Date Sets the system date.

Time Sets the system time.

Time Zone Sets the system time zone.

Act as NTP Server

Select Enable to synchronize with the NTP server.

Select Disable to close the NTP server synchronization.

Sync with external NTP

Server

Select YES to allow the IP STORAGE to synchronize with an NTP

server of your choice. Press Apply to change.

WARNING

If an NTP server is selected, please make sure your Thecus IP storage has been

setup to access the NTP server.