User`s manual

Chapter 7: Troubleshooting
orgot My Network IP Address
you forget your network IP address and have no physical access to the system,
ou can find out the IP address by either looking directly onto the N4200’s OLED
anel, or by using the setup wizard to retrieve the IP of your N4200.
1. Start the Setup Wizard, and it will automatically detect all Thecus IP storage
products on your network.
dress of the N4200 which you have
1. The network folder is currently mapped using a different user name and
pings to this network share.
ror
rver or shared resource by
the same user, using more than one user name, are not allowed.
Disconnect all previous connections to the server or shared resource and try
ou may refer the URL below for more network mapping information.
d&
nd Date Settings
he administrator is able to select an NTP Server to keep the N4200’s time
can not access the Internet, you may
e Time and Time Zone. If this happens:
2.
3. Under NTP Server, select No.
F
If
y
p
2. You should be able to find the IP ad
forgotten in the Device Discovery screen.
Can't Map a Network Drive in Windows XP
You may have problems mapping a network drive under the following conditions:
password. To connect using a different user name and password, first
disconnect any existing map
2. The mapped network drive could not be created because the following er
has occurred: Multiple connections to a se
again.
To check out existing network connections, type net use under the DOS prompt.
Y
http://esupport.thecus.com/support/index.php?_m=downloads&_a=viewdownloa
downloaditemid=57&nav=0
Restoring Factory Defaults
From the System menu, choose the Factory Default item and the Reset to
Factory Default screen appears. Press Apply to reset the N4200 to factory default
settings.
WARNING
Resetting to factory defaults will not erase the data stored in the hard
Problems with Time a
T
synchronized. However, if the N4200
encounter a problem when setting th
1. Login to the Web Administration Interface.
Navigate to System Management>Time.
116