User`s manual

iSCSI LUN ID
NOTE
1. Each RAID volume can only create one iSCSI thin-provision volume.
2. Each thin-provision volume can only create 5 iSCSI target volumes.
3. The notification will send out while the physical size of iSCSI
thin-provision capacity has used up to 90%.
When iSCSI target volume has been created, there is a default LUN ID of 0 in
previous firmware versions which was un-configurable. From v3.00.04, it is
configurable from 1 to 254 with a default of the next available number in ascending
numerical order. The LUN ID is unique and can not be duplicated except for LUN ID
0.
Error Corrections
None
124