User's Manual

11 INSTRUCTION MANUAL
CONTROLS AND FUNCTIONS
CORNER CORRECTION
User can select Top or Bottom Corner correction by pressing
the Select button.
TOP CORNER CORRECTION
Corrects the top corner image shape to a rectangle.
BOTTOM CORNER CORRECTION
Corrects the bottom corner image shape to a rectangle.
COLOR-TEMP
Adjusts color temperature to 9300K, 6500K(notes : 9300K is factory default).
Or, for a custom color mode, select “USER” and keep pressing select key
approximately 2 seconds to activate the RGB Sub-menu.
This adjust the intensity of the RGB video output. Using the select button
activate(blinking) the R-GAIN(Red Gain), G-GAIN(Green Gain) or
B-GAIN(Blue Gain) and change color strength for a customized color mode.
BRIGHTNESS
Increases( ) or decreases( ) the intensity(illumination) of the image.
CONTRAST
Increases( ) or decreases( ) the strength(lightness or dimness)
of the image.
MAIN MENU 2
RECALL
Resets the control functions back to the original factory preset values.
In order for the Recall function working, the timing must fall under one
of the factory preset timing modes.
ROTATION
Adjusts the tilt of image.
LANGUAGE
Selects a language among ENGLISH, DEUTSCH, FRANÇAIS, ESPAÑOL,
(JAPANESE).
DEGAUSS
Manually demagnetizes the CDT. This can be used if the display
becomes discolored.
Allow a minimum of 20 minutes to elapse between each degauss.
The monitor also will automatically degauss when power is applied,
and power saving mode is changed to normal mode.