User's Manual

RESOLUTION FREQUENCY
PRESET MODES
H(Pixels) V(Lines) H(KHz) V(Hz)
640 350 31.5 70
720 400 31.5 70
640 480 31.5 60
VGA
640 480 43.2 85
MAC 640 480 35.0 67
800 600 37.8 60
800 600 53.6 85
1024 768 48.3 60
1024 768 68.6 85
VESA
1280 1024 63.9 60
7…………………………………………………………………...………...…INSTRUCTION MANUAL
RESOLUTION
This monitor is a digitally-controlled multi-frequency monitor.
It operates at horizontal frequencies of 31 to 70KHz and vertical frequencies
of 60 to 85Hz.
Because of its micro processor-based designs it offers auto-synchronization
and auto-sizing capabilities. This monitor offers 10 programmed settings
as listed in the table below.
And designs its best quality at 1280×1024,
64KHz@60Hz.
These 10 preset modes cover most of the common video modes supported by
popular graphic adaptors. However, each adaptors implementation of these
video modes may vary slightly in timings. You may find it necessary to make
minor adjustments to the display settings (i.e., horizontal position) using
the On Screen Display. For further information and instructions on using
the On Screen Display, please refer to “Controls and Functions”.
CONTROLS AND FUNCTIONS
A. POWER ON/OFF( ) )
Turns the power ON or OFF. There will be a few seconds delay before
the display appears.
The power LED(next to the power switch) lights when the power
is turned ON.
The power is turned off by pressing the power switch again and
the power LED goes out.
B. MENU (MENU)
Activate sand exits the On Screen Display. This button can also be
used to move previous menu or status.
MAIN MENU : BRIGHTNESS / CONTRAST, COLOR TEMPERATURE,
FREQUENCY&PHASE, POSITION, LANGUAGE, UTILITIES, EXIT
INSTRUCTION MANUAL………………………………………………………..…………………...8