User Manual

26
Adjusting tracking condition
Picture search, Still Picture, Slow Motion, Tracking and Repeat playback
Reverse picture search function
Picture Search
Press x 1 or x 2 during the playback.
Forward picture search function
Press x 1 or x 2 during the playback.
To return to playback: Press .
Still Picture
Press PAUSE/STILL during playback. To resume
normal playback: Press
.
Slow Motion
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
During playback press
SLOW
.
To return to playback: Press
.
Press PAUSE during playback.
Press SLOW one by one: The picture advances frame
by frame
To return to playback: Press PLAY or PAUSE.
Frame by Frame picture
Note:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• These Special Playback will automatically change
to playback after approx. 5 minutes to protect the
video tape against excessive wear.
SLOW
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the SET + or – to reduce the noise bars.
If the still picture jitters excessively, press SET + or –
to stabilize the still picture.
Automatic tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET +/– to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Manual tracking adjustment
Repeat playback
The whole of the video tape will be played until its end.
Then the tape will be winded until its beginning and the
playback will be repeated.
1
Repeat the steps 1~2 on
page 19 and select
AUTO REPEAT, .
3
Press SETUP MENU until the menu screen is
cleared.
" " will appear if you press CALL.
Then press ENTER
to
select [ON] or [OFF].
If [ON] is selected, the
playback will be repeated
endlessly.
4
To start the playback, press .
The playback will be repeated endlessly.
You can stop this playback anytime with .
However the Auto Repeat is still switched on.
2
AUTO REPEAT [ ON]
SCENE REPEAT
VCR EXTENSION
SELECT :
ENTER
: ENTER
MENU
EXIT :
AUDIO DUBBING
AUTO REPEAT [OFF]
SCENE REPEAT
VCR EXTENSION
SELECT :
ENTER
: ENTER
MENU
EXIT :
AUDIO DUBBING
To cancel repeat mode:
Follow the above steps 1 and 2, then press
ENTER to select the OFF position. Press MENU
to return to the TV.
Press A.TRK to reactivate automatic tracking again.
“AUTO TR.” will appear.
•
Skip Search
Each time you press SKIP SEARCH while a tape is
playing, the unit will fast-forward ahead 30 seconds
on the tape. You may press the button up to six times
in a row to move 180 seconds (three minutes) ahead.
1 press: 30 seconds of tape
2 presses: 60 seconds of tape
3 presses: 90 seconds of tape
For example: