User Manual

24
Auto clock setting
Daylight Saving Time setting
Repeat the step 1 on page 23 and
press or to select “DAYLIGHT
SAVING TIME”, then press EN-
TER.
1
2
Press or to select one of
the options, then press ENTER.
You can set the Daylight Saving Time automatically or manually.
When you want to set the Daylight Saving Time manually, on
the first Sunday in April you set to “ON”, and on the last
Sunday in October you set to “OFF”.
for manual setting
(forward one hour)
for manual setting
(back one hour)
for automatic setting
(read XDS in the signal)
ON:
OFF:
AUTO:
When shipped from factory, the DAYLIGHT SAVING TIME
option is set to “AUTO” position.
When the clock is not set, Daylight Saving Time setting is not
available.
When there is no Daylight Saving Time in your area, always
select “OFF” position in step 2.
•
•
•
NOTES:
Turn ON the TV.
When a TV is connected with an audio/video cable, select the
video input mode on the TV.
When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
Preparation:
•
•
•
•
á +/Ð/ENTER/MENU ñ
SYSTEM SETUP
CLOCK SE T
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
ON OFF
ON OFF
DAYLIGHT SAVING TIME
á +/Ð/ENTER/MENU ñ
DAYLIGHT SAVING TIME
ON
OFF
AUTO
3
Press SET UP MENU until the menu screen is cleared.
2C30101AE(24-29) 10/31/02, 20:3024