User's Manual

55
Creating and editing a play list
NOTE:
It is no problem to omit the proce-
dures for confirming the scene or
adjusting sot and end points.
6
Select “SET END” at the end point of the scene you want to erase
and press ENTER.
The still image at the end point appears at the right small screen.
SELECT
ENTER/
SELECT
RETURNENTER BACK END
TITLE
MENU
EDIT PROGRAM
NAME Family
CHAPTER 2/3
LENGTH 00/00:30:17
00:11:42
00:08:28 00:30:17
Preview
Adjust start
SET END
Finish
SELECT
ENTER/
SELECT
RETURNENTER BACK END
TITLE
MENU
EDIT PROGRAM
NAME Family
CHAPTER 2/3
LENGTH 00/00:30:17
00:15:58
00:08:28 00:15:58
Preview
Adjust start
SET END
Finish
7
Check the erased scenes.
• Select “Preview” and press ENTER. Then the video where the
scenes between the start and end points are erased is played
back.
• Each operation button (F.FWD, REW, INDEX +, INDEX -, PLAY,
PAUSES/STEILL) for playback also can be used.
8
Adjust the start and end points.
• To adjust the start point, select “Adjust start” and press ENTER.
You can change the start point every one second by pressing
or .
• To adjust the end point, select “Adjust end” and press ENTER.
You can change the end point in the same way as the start point.
9
If you determine the scene to be erased, select “Finish” and press
ENTER.
VRDVD4005_P51-P68 03.8.20, 11:25 PM55