User's Manual

66
Dubbing a tape onto a disc
You can record video or audio on
a video tape onto a disc.
NOTES:
Dubbing cannot be carried out when
• the copy guard supporting tape is
used.
• disc protection is set.
• disc has no recording space.
Dubbing stops when
• the video tape is played back to
the end and stops.
• recording space becomes full.
Copyright
• The videos recorded from the TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
Preparation:
• Turn ON the TV and set to the video input mode.
• Load a source video tape and a disc for recording.
• Set the erase-protection tab of the source video tape to prevent the
data from accidentally being erased.
• Confirm the disc space before operation.
1
Press DVD/VCR to set this unit to DVD mode.
The DVD mode lamp comes on.
2
Press REC MODE and select the recording mode.
• When REC MODE is pressed each time, “SP”, “LP”, “SLP” or
“XP” is selected in this order.
• The recording mode is indicated on both the TV screen and the
display window.
• For the details of the recording mode, see page 42.
3
Press DVD/VCR and set the unit to VCR mode.
NOTE:
Confirm that the VCR mode lamp stays on.
4
Press DUBBING.
• By pressing DUBBING, the DVD mode is selected.
• The VCR is waiting for playback and the DVD is waiting for re-
cording. Then the following message will appear.
5
Select “YES” and press ENTER.
Dubbing starts.
• To stop dubbing, select “NO” and
press ENTER.
6
In recording, VCR playback, DVD recording and “dub” (dubbing)
appear on the display window.
Video playback Dub DVD recording
TO CONFIRM DUBBING VCR -> DVD
YES NO
7
To stop dubbing, press STOP.
VRDVD4005_P51-P68 03.8.20, 11:26 PM66