User's Manual

68
Dubbing video or audio by connecting other equipment
You can connect the other VCR or comcorder to dub video or audio.
Typical connection: When using this unit as a recording device
You can connect to the audio/video input jack (L1) at the rear side of
this unit. In addition, each S video input jack at the front and rear sides
and an S video output jack is at the rear side of the unit so that they
can be used for recording on the disc.
To Audio (R) IN
Recording VCR
Playback VCR
To Audio (L) IN
To Video IN
To Audio (R) OUT
To Audio (L) OUT
To Video OUT
AUDIO/VIDEO Cord (supplied)
To Audio (R) IN
AUDIO/VIDEO Cord (not supplied)
Recording VCR
Playback Camcorder
To Audio (L) IN
To Video IN
To AV Jack
NOTES:
• When this unit is used as a play-
back device, a mark or a charac-
ter displayed on the screen is also
dubbed as an image. When the
screen display is set to OFF, see
“Selecting the screen display” on
page 74.
• The videos recorded from the TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
• The copy guard supporting tape
cannot be used for dubbing.
When a video is recorded using this unit
Preparation:
• Turn ON the TV and set the unit to the video input mode.
• Load a video tape where the erase-protection tab is not activated or
a disc with enough recording space.
• To record onto a video tape, set the unit to VCR mode, whereas to
record onto a disc, set it to DVD mode.
1
Press INPUT SELECT and set the channel to L2 (or L1).
Confirm that L2 (or L1) appears on the display window.
2
Press REC MODE/SPEED and select the recording mode.
VCR: SP or SLP (See page 38)
DVD: SP, LP, SLP or XP (See page 42)
3
Press REC/OTR on the recording VCR, then press PAUSE/STILL.
4
Press the PLAY button on the playback VCR or CAMCORDER,
then press the PAUSE/STILL button.
5
Release the recording pause and the playback still simultaneously
to begin the duplicating process.
6
To stop dubbing, press STOP.
VRDVD4005_P51-P68 03.8.20, 11:26 PM68