User's Manual

ManualsBrandsORION ELECTRIC ManualsElectronicsDVD-RW/VCR TV Interface Device

Disc setup and operation

You can format, protect or finalize the disc.

Preparation:

• Turn ON the TV and set it to the video input mode.

• Select “DISC SETUP” from “SYSTEM SETUP”. For

the procedure, see steps 1 to 3 in “Using the SETUP

MENU”.

REFORMAT

You can format a recorded DVD-RW.

Check the content of the disc before format. If you for-

mat the disc, the recorded content of the disc will be

erased.

To format a DVD in the video mode, select “REFOR-

MAT AS DVD VIDEO”, and to format it in the VR mode,

select “REFORMAT AS DVD VR”.

The screen below will appear.

• When you select “Format” and press ENTER, format

will start.

• When you select “Cancel” and press ENTER, the DISC

SETUP screen will appear.

• If you want to name the disc, select “Edit label” and

press ENTER. The disc name input screen will ap-

pear.

For disc name input, see page**.

NOTES:

• You cannot format Ver. 1.0 DVD-RW and DVD-R.

• You cannot format a protected disc.

• You cannot watch video screen images during for-

mat.

NEW DISC FORMAT

If you insert a blank DVD-RW, the disc is automatically

format.

Select “NEW DISC FORMAT” and select the mode to

be used for automatic format from the list below.

VR: format the DVD in the VR mode.

Video: format the DVD in the video mode.

NOTE:

The automatic format is effective only for Ver. 1.1 or

later DVD-RW.

FINALIZE

When you finalize the disc recorded or edited by this

unit, you can playback the disc on other DVD players.

When “FINALIZE” is selected, the screen below will ap-

pear.

NOTES:

• The finalization time is between a few minutes and

about an hour. The required time varies according to

disc type or the amount of free space on the disc.

• You can record or edit a DVD-RW (in VR mode) final-

ized by this unit in the usual fashion, but you cannot

do these operations with a DVD-RW (in video mode)

or DVD-R.

• For a DVD-RW (in VR mode) which was finalized by

another unit, you can record or edit on this unit by

canceling the finalization.

• You cannot playback a disk recorded on VR mode on

a unit that does not support DVD-RW.

• Even if you finalize a disc in the video mode, the disc

cannot be played back in some DVD players.

• You cannot watch video screen images during final-

ization.

TIMER REC SET

SYSTEM SETUP

AV SETUP

REC SETUP

CH SETUP

OTHER

DISC SETUP

REFORMAT DVD VIDEO

REFORMAT DVD VR

BLANK FORMAT

FINALIZE

PROTECT DISC

UNDO FINALIZE

PROCEED

SETUP MENU

ENTER/

SELECT

RETURN SETUPENTER BACK END

SELECT

Edit labe CancelFormat

default name

Format

Label

VRDVD4005_P69-P86 03.8.20, 11:28 PM73