User's Manual

75
Turning on the screen display
This section describes settings about movie play-
back.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “AV SETUP 1” from “AV SETUP”. For the pro-
cedure, see steps 1 to 3 in “Using the SETUP MENU”.
TV SCREEN
You can select the TV screen size to suit the screen
image.
Select “TV SCREEN” and select screen size from the
list below.
4:3 Letter Box
Select this mode when connecting to a conventional
TV. When playing back a wide screen DVD disc, it
displays a wide picture with black bands at the top
and bottom of screen.
4:3 Pan Scan
It displays a wide picture across the whole screen
with left and right edges automatically cut off.
16:9 Wide
Select this mode when connecting to a wide-screen
TV.
A wide-screen picture is displayed in full size.
NOTE:
If the DVD disc is not formatted in the pan scan format,
it displays a 4:3 aspect ratio.
STILL MODE
You can set the type of image displayed on the TV
screen when the playback of the DVD is paused.
Select “STILL MODE” and select the image to be dis-
played from the list below.
AUTOMATIC
When the pause is maintained for a long time, the
image display will turn off. When you cancel the pause,
the movie plays back as usual.
STILL BY FRAME
An image is displayed on the screen from when the
unit is paused.
NOTE:
When the pause is maintained for a long time and the
same image has been displayed, the TV screen may
be fatally damaged. It is recommended to use the de-
fault setting (AUTOMATIC) as it is for the STILL MODE.
NO NOISE BACKGROUND
When you select a channel where the broadcast has
finished or no broadcast is set, the TV screen will auto-
matically appear blue.
The function above works when you select “NO NOISE
BACKGROUND” and select “ON” from the list. If you
don’t want to use this blue background function, select
“OFF”.
The default setting is “ON”.
EXTERNAL VIDEO INPUT
This unit comes with an S-video input terminal and pin
plug type (COMPOSITE) terminal as video input termi-
nals. If both terminals are used, the priority terminal
can be selected.
Select “EXTERNAL VIDEO INPUT” and select the mode
from the following list.
AUTOMATIC
The S-video input terminal has priority. This is the
default setting.
COMPOSITE VIDEO
The composite video input has priority.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
AV SETUP 1
TV SCREEN
STILL MODE
NO NOISE BACKGROUND
EXTERNAL VIDEO INPUT
SETUP MENU
ENTER/
SELECT
RETURN SETUPENTER BACK END
4:3 Pan Sean
AUTOMATIC
ON
AUTOMATIC
SELECT
VRDVD4005_P69-P86 03.8.20, 11:28 PM75