User's Manual

76
This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “AV SETUP 2” in “AV SETUP”. For the proce-
dure, see steps 1 to 3 in “Using the SETUP MENU”.
BRIGHTNESS
You can control the brightness level of the image.
Select “BRIGHTNESS” and select the level from the
list below.
MAX:The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
DNR
You can adjust the digital noise reduction function that
reduces screen noise during playback.
Select “DNR” and select the level from the list below.
MAX: Uses the max. DNR effect.
STD: Uses a DNR effect at the middle level between
MAX and MIN.
MIN: Uses the min. DNR effect.
OFF: Default setting. DNR is not used.
Adjusting audio
This section describes audio settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “AUDIO” from “AV SETUP”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU”.
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Select “DRC” and select the level from the list below.
MAX: Full dynamic range is increased.
STD: Full dynamic range is maintained.
MIN: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD.
VIRTUAL SURROUND (Spatializer N-
2-2
TM
)
Sound that is not recorded in the surround mode will
be changed to artificial surround sound and output.
Select “VIRTUAL SURROUND” and select “ON” from
the list to activate the virtual surround function. To not
use the virtual surround, select “OFF”.
The default setting is “OFF”.
EXTERNAL AUDIO INPUT
The audio mode for the audio input terminal can be
selected between stereo or monaural.
Select “EXTERNAL AUDIO INPUT” and select from the
list below.
STEREO: The sound is treated as stereo sound
L CH: The sound is treated as the monaural
sound of the left channel.
R CH: The sound is treated as the monaural
sound of the right channel.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
AUDIO
DRC
VIRTUAL SURROUND
EXTERNAL AUDIO INPUT
SAP
MAX
ON
STEREO
OFF
SETUP MENU
ENTER/
SELECT
RETURNENTER BACK END
SELECT
SETUP
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
AV SETUP 2
BRIGHTNESS
DNR
SETUP MENU
ENTER/
SELECT
RETURN SETUPENTER BACK END
STD
MIN
SELECT
VRDVD4005_P69-P86 03.8.20, 11:28 PM76