User's Manual

77
Turning on image quality control / recording
This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “REC SETUP”. For the procedure, see steps
1 to 3 in “Using the SETUP MENU”.
INITIALIZING REC TO
You can select the medium for recording that is first
displayed in the item “REC TO” on the advance timer
recording screen. The initial setting is “DVD”.
Select “FORMAT REC TO” and select the medium for
recording from the following list.
DVD: DVD is displayed in “REC TO”.
VCR: VCR is displayed in “REC TO”.
INITIALIZING REC MODE
You can select the recording mode that is first displayed
in the item “REC MODE” on the advance timer record-
ing screen. The initial setting is “SP”.
Select “INITIALIZING REC MODE” and select the re-
cording mode from the following list.
DVD: XP/SP/LP/SLP
VCR: SP/SLP
NOTE:
For the DVD recording mode, see page **. And for the
VCR recording mode, see page **.
AUTO CHAPTER
You can automatically make chapter marks on the DVD
to be recorded.
Select “AUTO CHAPTER” and select the interval be-
tween chapter marks from the list below.
OFF: The automatic chapter is not used.
5 MIN: The interval is set to 5 minutes
10 MIN: The interval is set to 10 minutes
15 MIN: The interval is set to 15 minutes.
30 MIN: The interval is set to 30 minutes.
SAP (Second Audio Program)
This unit is fitted with an SAP broadcast system that
enables you to switch to a second audio program while
viewing a selected channel.
This function applies only when the program is broad-
cast in multiple languages through the SAP broadcast
system.
Select “SAP” and select “ON” to use SAP, and to not
use it, select “OFF”.
Listening to SAP
When the unit is turned on or a channel selection is
made, make certain the letters “SAP” appear on the
screen. This means that “Second Audio Program” broad-
casting is available.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
REC SETUP
INITIALIZE REC TO
INITIALIZE REC MODE
AUTO CHAPTER
SETUP MENU
ENTER/
SELECT
RETURN SETUPENTER BACK END
DVD
SP
OFF
SELECT
VRDVD4005_P69-P86 03.8.20, 11:28 PM77