User's Manual

49
8 : 00
11 : 00
9 : 00
10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
Timer recording
NOTES:
•
Recording starts 5 seconds before
the preset starting time.
• The total recording time for one time
is max. 23 hours and 59 minutes.
• You cannot use the timer recording
for the both DVD and VCR at the
same time.
• When the start time for timer record-
ing comes in using the function of
REC/OTR explained in “Recording
a TV program” and “One touch
Timer Recording (OTR)”, the record-
ing with REC/OTR is forcedly can-
celled and the timer recording starts.
• You can playback the DVD during
the VCR timer recording, whereas
you can playback the VCR during
the DVD timer recording.
11
Select “OK” and press ENTER.
The timer program is determined and the TIMER REC SET
screen appears again.
12
When you enter the other program for the timer recording, re-
peat the steps 3 to 11.
13
Press SETUP.
The TIMER REC SET screen disappears and the display will
return to the normal screen.
14
Press TIMER REC. The timer indication ( ) will appear on the
display and the unit stands by for recording.
• If the program is DVD recording only, the unit will change to
VCR mode automatically. (The DVD mode cannot be selected.)
• If the program is VCR recording only, the unit will change to
DVD mode automatically. (The VCR mode cannot be selected.)
• If the programs are DVD and VCR recording, the unit will turn
off. If you want to use the unit, press TIMER REC again to
deactivate the timer.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1
& 2 of “Setting timer recording” and display the TIMER REC SET screen.
To change the timer recording, select the program to be changed and
press ENTER. The changing method is the same as that for the re-
cording a program for the first time.
Canceling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press CLEAR/CANCEL,
then the selected program will be erased from the timer recording list.
In case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
ENTER/
SELECT
RETURN BACK END
SELECT
SETUP
ENTER
TIMER REC SET
REC REC
TO MORE
TYPE
DATE
START
END
CH
REC TO
REC MODE
ONCE
06
DVD
LP
OK
20,08,03(--)
20:00
21:30
SETUP MENU
VRDVD4005_P37-P50 03.8.21, 1:20 AM49