User's Manual
15
The Auto Clock function will automatically set the built-
in clock (Month, Day, Year and Time) when the TV/VCR
is connected to an Antenna or Cable system and it is
turned off. As the TV/VCR searches for a receivable
station in your area and it receives a broadcast signal
for Auto Clock, the Auto Clock needs several minutes
to set itself.
Auto clock setting
1 Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2 Plug the AC Power cord to the AC outlet.
3 Make sure the TV/VCR is turned off.
• If you press POWER, the Auto Clock set is not effective.
4 Wait at least three minutes and press POWER.
5 Press CALL to check the clock on the screen.
6 If the clock is not set, check the Antenna condition. The
Auto Clock may not function properly if the reception con-
dition is not good.
The Auto Clock Adjustment will be performed at 12:00 PM
everyday if you turn off the TV/VCR.
• If you use a cable box and you want Auto Clock adjustment
to be performed, the cable box must be left on.
• The Auto Clock Adjustment is not effective when there is
a difference of more than 5 minutes exists between the
built-in clock time and the actual time.
Auto clock adjustment
When shipped from factory the AUTO CLOCK option is set to
ON.
But if you do not want Auto Clock set (Adjustment):
1 Turn on the TV/VCR.
2 Press MENU.
3 Press or to select the SYSTEM SET-UP option,
then press the ENTER button.
4 Press or to select the AUTO CLOCK option.
5 Press ENTER to select OFF.
6 Press MENU repeatedly to return to the normal screen.
• When the AUTO CLOCK is set to OFF, the Auto Clock
adjustment does not function.
• Set the clock manually (see page 16).
To set auto clock to off
In the rare event that you live within broadcast range of two
stations in two different time zones, the TV/VCR may
recognize the wrong station for the Auto Clock set.
To correct the situation:
1 Press MENU.
2 Press or to select the SYSTEM SET-UP option,
then press ENTER.
3 Press or to select the STANDARD TIME option,
then press ENTER.
To set standard time
4 Press or to select your time zone, then press ENTER.
ATLANTIC : GMT – 4 hours
(GMT: Greenwich Mean Time)
EASTERN : GMT – 5 hours
CENTRAL : GMT – 6 hours
MOUNTAIN : GMT – 7 hours
PACIFIC : GMT – 8 hours
ALASKA : GMT – 9 hours
HAWAII : GMT – 10 hours
AUTO : AUTO SET
5 Press MENU twice to return to the normal screen.
NOTES:
•To be able to select the standard time, the clock must first
be set by “AUTO CLOCK” once.
• If you live in Newfoundland and the Auto Clock does not
function properly, set the AUTO CLOCK menu option to
OFF and set the clock manually.
1 Press MENU. Press or to
select the SYSTEM SET-UP
option, then press ENTER.
2 Press or to select the
DAYLIGHT SAVING TIME option,
then press ENTER.
3 Press or to select one of the
options, then press ENTER.
Press MENU until the MENU
screen is cleared.
ON: for manual setting
(forward one hour)
OFF: for manual setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
NOTES:
• When shipped from factory, the DAYLIGHT SAVING TIME
option is set to AUTO position.
• When the clock is not set, Daylight Saving Time setting is
not available.
• When there is no Daylight Saving Time in your area, always
select OFF position in step 3.
When you want to set the Daylight Saving Time manually, on
the first Sunday in April you set to “ON”, and on the last Sun-
day in October you set to “OFF”.
You can set the Daylight saving time automatically or
manually.
á
ñ
Daylight saving time setting
〈+/
-
/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
á
ñ
2D80401A[E](10-17) 4/27/04, 1:34 PM15