DRAFT Introduction Various settings DIGITAL VIDEO Disc playback Hi-Fi VCR & DVD VIDEO RECORDER D-VRW1SU Tape playback Recording OWNER’S MANUAL Editing the disc Dubbing Additional information W1 ©2005 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs.
Introduction SAFTY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFEGUARDS Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14.
IMPORTANT SAFEGUARDS Introduction 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
Introduction Contents Introduction •• •• • • •• • •• SAFTY PRECAUTIONS ...................................... 2 IMPORTANT SAFEGUARDS .............................. 3 Contents ............................................................. 6 Features .............................................................. 8 Disc ..................................................................... 9 Handling discs ................................................... 9 Discs which can be played back ...................
Contents Tape playback •• • Loading and unloading a cassette tape ........ 48 Cassette tape playback ................................... 49 Special playback .............................................. 50 Picture search .................................................. 50 Still picture ....................................................... 50 Slow motion ..................................................... 50 Frame by frame picture ....................................
Introduction Features Edit function Not only can you playback and record video tapes, but you can also playback DVD discs or make recordings using DVD-RW or DVD-R discs with this unit. In addition, you can enjoy editing the programs you record. Playback function A realistic, powerful, Movie Theater sound When connected to Dolby Digital and DTS compliant devices, you can enjoy realistic, powerful surround sound.
Disc Handling discs Removing the Disc from its case Storing discs • Store the disc in the case to avoid any risk of scratches, dirt or damage. • Do not leave the disc exposed to direct sunlight or in hot or humid places. Cleaning discs Wipe the disc with a clean, dry cloth from the center outward toward the edges. • Do not wipe the disc in a circular motion around the center. • Do not use liquid or aerosol cleaners. Introduction Be sure to hold the disc by its edges.
Introduction Disc Discs on which video can be recorded To record video with this unit, use the discs below: Media type Logo mark DVD-RW Ver.1.0 Ver.1.1 Ver.1.2 Ver.1.1CPRM support DVD-R Ver.2.0 (Ver.2.0/4x/8x) DVD-RW Recording format This unit has two modes for formatting discs for recording: VR mode and Video mode. When a blank, new disc is loaded into this unit, the automatic format function starts to format the disc. (For the disc format setting in this step, see page 27.
Disc When recording in the Video mode A DVD-Video has large partitions called “Titles”, and smaller partitions within them called “Chapters”. A music CD has other partitions called “Tracks”. A number is allotted to each partition and these numbers are called “title numbers”, “chapter numbers” or “track numbers”. When a disc recorded in the Video mode is finalized, it cannot be recorded onto any more. Therefore, before finalization, be sure to perform all desired recording.
Introduction Parts and functions Front * This unit has a door on the front panel. Please open it to access the S-VIDEO jack and the AUDIO (L/R)/VIDEO IN (INPUT 2) jacks.
Parts and functions Display window 2 P 1 No. Introduction 4 3 Display Description 1 Lights during video tape playback. Video tape is temporarily stopped. Lights during video tape recording. P Progressive scanning mode. Timer recording display. XP/SP/LP/SLP 4 DVD recording modes. XP, SP, LP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly. SP/SLP 2 VCR recording modes. SP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly.
Introduction Parts and functions Page Remote control OPEN/CLOSE EJECT PROGRESSIVE TV/VIDEO ON/STANDBY 0-9 INSTANT REPLAY INSTANT SKIP DISPLAY DVD VCR CH / DUBBING DVD MENU INPUT SELECT TOP MENU/TITLE MENU SETUP / TRK +/– / ENTER RETURN CANCEL Opens or Closes the tray. Ejects the cassette tapes Activates the progressive scanning mode. Select to operate TV/VIDEO Turns power on/off.
Parts and functions Inserting Batteries into the Remote Control: the battery compartment 2 Install two “AAA” batteries, pay- 3 Replace the compartment cover. 1 Open ing attention to the polarity diacover in the direction of the arIntroduction gram in the battery compartment. row. Caution: Never throw batteries into a fire. Note: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind.
Introduction Antenna connections If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 18 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
Antenna connections DVD/VCR TO TV CONNECTION TV UHF/VHF IN 75 ohm coaxial cable (supplied) 75 ohm coaxial cable (supplied) NOTE: If a UHF or VHF antenna is used, set the TV/CABLE menu option to the “TV” mode. TV with single 75 ohm UHF/VHF antenna input TV Splitter 75 ohm input 75/300 ohm outputs (not supplied) Introduction After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV.
Introduction Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception.
Cable TV connections IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system.
Introduction Connections with the TV or audio component The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections with the TV or audio component Connect to a stereo amplifier with audio output You can enjoy high quality audio by connecting the audio output to your amplifier. Connect the audio output jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
Introduction Auto clock setting / Setting the video channel Auto clock setting Preparation: You must connect the antenna or cable before connecting the AC cord to the power source. Wait at least 3 minutes with the power turned off, after the antenna or cable is connected, for the auto clock feature to activate. After the clock is set automatically, you may have to set the time zone and daylight saving time. (See page 26.) Press ON/STANDBY to turn on the DVD/VCR after the auto clock operation completed.
Various settings SETUP MENU The SETUP MENU consists of several menus where you can make various settings concerning language, audio functions, and images. In addition, this menu includes a clock, channel and other things that require setting just after purchase. For details of each menu, see the corresponding section in this chapter. Press or to select the desired submenu and 3 press ENTER. The screen for the selected submenu will appear.
Various settings Setting the language You can choose the language of the menu screen, DVD menu, DVD audio and subtitles. Selectable languages: Preparation: ENGLISH, FRANCAIS, ESPANOL The language you have selected will play if it is recorded on the disc. • Turn ON the TV and set it to the video input mode. • Select “LANGUAGE” from “SYSTEM SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23. ORIGINAL The unit will select the first priority language of each disc.
Setting the parental control Some discs are specified as not suitable for children. This unit can prevent playback of such discs. Preparation: • Turn ON the TV and set it to the video input mode. • Select “PARENTAL” from “SYSTEM SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23.
Various settings Setting the clock The clock is set to the correct time automatically, but it can also be set manually. The clock can be set for daylight saving time and time zone. Preparation: • Turn ON the TV and set it to the video input mode. • Select “CLOCK” from “SYSTEM SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23.
Setting the disc You can format, protect, or finalize a disc. Preparation: • Turn ON the TV and set it to the video input mode. • Select “DISC SETUP” from “SYSTEM SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23. NEW DISC FORMAT If you insert an unused DVD-RW disc, the disc is automatically formatted. If you use the DVD-RW (Ver.1.1/1.2), you can select the mode to be used for automatic format. Select “NEW DISC FORMAT” and select the mode from the list below.
Various settings Setting the disc / Other (SYSTEM SETUP) NOTES: • During the finalization the cursor will move repeatedly. When the finalization finished, “DISC FINALIZED” will appear. • The finalization process may require a few minutes to about 1 hour according to disc type or the amount of free space on the disc. • You can record or edit a finalized DVD-RW (in VR mode) by cancelling the finalizing, but you cannot do these operations with a DVD-RW (Video mode), or with a DVD-R.
Setting the screen This section describes settings about the screen. Preparation: • Turn ON the TV and set it to the video input mode. • Select “AV SETUP 1” from “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23. SETUP MENU AV SETUP 1 SYSTEM SETUP TV SCREEN 4:3 Letter box AV SETUP STILL MODE AUTOMATIC INPUT RECLINE1 SETUP VIDEO LINE2 INPUT CH SETUP VIDEO Field*: A field refers to the video information in onehalf of a frame. 1 frame (screen) consists of 2 fields.
Various settings Setting the image quality / Setting the audio This section describes image quality settings. This section describes audio settings. Preparation: Preparation: • Turn ON the TV and set it to the video input mode. • Select “AV SETUP 2” in “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23. • Turn ON the TV and set it to the video input mode. • Select “AUDIO” from “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23.
Setting the audio / Setting the recording AUTO CHAPTER This unit is fitted with an SAP broadcast system that enables you to switch to a second audio program while viewing a selected channel. This function applies only when the program is broadcast in multiple languages through the SAP broadcast system. Select “SAP” and select “ON” to use SAP, and to not use it, select “OFF”. You can automatically make chapter marks on the DVD to be recorded.
Various settings Setting the channel / Setting other items This DVD/VCR is equipped with a channel memory feature that allows you to skip channels up or down to the next channel set in memory, hence skip over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode.
Disc playback Playback procedure Preparation: • Turn ON the TV and set to the video input mode. • Press DVD to select the DVD mode. (The DVD indicator will light.) OPEN/CLOSE. 1 Press The disc tray will open. a disc onto the tray. 2 Place Hold the disc, position it with the printed label side up, align it with the guides, and place it in its proper position.
Disc playback Playback by selecting a title When playing back a recorded disc, you can display the title menu and select the title to be played back. Preparation: • Turn ON the TV and set to the video input mode. • Load a recorded DVD. • Press DVD to select the DVD mode. (The DVD indicator will light.) TITLE MENU. 1 Press The title menu will appear.
Checking media information Various information on the loaded disc can be displayed on the TV screen. Preparation: • Turn ON the TV and set it to the video input mode. • Load the disc. • Press DVD to select the DVD mode. (The DVD indicator will light.) DISPLAY. 1 Press Media information will appear.
Disc playback Special playback Fast forward playback NOTE: There may be a slight delay between pressing the button and the function activation. Press SEARCH during normal playback. will increase the speed of the search Each press of SEARCH (x2), (x12), (x24), (x60). (The speed of the search is increased up to only 2 steps in Audio CD.) • To resume normal playback, press PLAY. Review playback Press SEARCH during normal playback.
Instant skip / Locating a specific scene Instant skip Use this function to skip commercials while you playback. Press INSTANT SKIP during playback. The time jumps to a point approx. 30 seconds later and playback resumes. NOTE: With some DVD-Video, the Commercial skip operation may not work. Locating a specific scene Press PLAY MODE. 1 The play mode screen will appear. TIME SEARCH CHAPTER SEARCH TITLE SEARCH Disc playback Specify the time recorded on the disc, chapter or title to playback.
Disc playback Repeat playback Instant replay This feature can be used to repeat the last 10 seconds of viewed material, and continues to play as normal. Press INSTANT REPLAY during playback. The video returns to a point 10 seconds before and playback resumes. NOTES: • If the time from the title top is less than 10 seconds when INSTANT REPLAY is pressed, the title top is repeated and then the video is played back. • With some DVD-Video, the one touch repeat operation may not work.
Title selection / DVD menu Title selection Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. TOP MENU/TITLE MENU during playback. 1 Press The title menu appears on the screen. • Press TOP MENU/TITLE MENU again to resume playback at the scene when you pressed TOP MENU/TITLE MENU. DVD menu Some DVDs allow you to select the disc contents using the menu.
Disc playback Changing angles / Zooming / Karaoke playback Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. ANGLE during playback. 1 Press The current angle will appear. Angle 1 out of 3 2 Press ANGLE repeatedly until the desired angle is selected. Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during playback.
