8.5/21.5-INCH WIDE TFT-LCD MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
SAFETY INSTRUCTION CAUTIONS ………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 FCC RF INTERFERENCE STATEMENT ……………………………....................... CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… INSTALLATION 5 6 7 CONTROLS AND FUNCTIONS ……………………………………………………….. 8 ~ 15 MOUNTING GUIDE ……………………………………………………………………..
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ※ Notice: Stand & screws are optional A. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box. Stand Base Stand Body FS4x12 screws 3. Once assembled take the monitor up carefully and face the front side. B. Positioning your display 1.
1. Rear Connection 1 2 3 4 1. AUDIO OUT. 2. AUDIO IN. 3. VGA. 4. DVI. 5. DC 12V.
2. Bottom Key Control 1 2 3 4 5 6 7 8 1. SOURCE/ Selects VGA or DVI input. Selects an option in the OSD. 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3, 4. AUTO/▼ & ▲ Moves another option in the OSD. The ▲ button converts the aspect ratio as 16:9 or 4:3. The AUTO/▼ button is auto adjustment function in the VGA input. 5, 6. VOL(-) & VOL(+) Adjusts the volume and menu settings. The VOL(-) button is mute function. 7. / I Turns the power on or off.
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is yellow color. 3. Press the SOURCE/ button twice to enter the sub-menu and adjust the item. 4. Change the value you wish to adjust by using the VOL(-) & VOL(+) buttons. 5. Press the MENU button twice to exit the sub-menu and the adjusted item. 6.
2. Image Setting Option Clock 1) Function Value Adjusts the vertical noise of screen image. 0 ~ 100. Phase1) Adjusts the number of horizontal picture elements. 0 ~ 60. Gamma Adjusts the gamma of the picture. 0 ~ 3. Sharpness Adjusts sharpness of the picture. 0 ~ 4. Auto Adjust.. 1) Auto geometry adjustment. Back Returns to previous menu. 1) Unavailable in DVI input.
3. Position (Only VGA input) Option Function Value H. Position Adjusts the horizontally picture position. 0 ~ 100. V. Position Adjusts the vertically picture position. 0 ~ 100. Back Returns to previous menu.
4. OSD Menu Option Function Value OSD H. Pos. Moves the horizontally OSD position. 0 ~ 100. OSD V. Pos. Moves the vertically OSD position. 0 ~ 100. OSD Timer Adjusts the display time of OSD. 5 ~ 20. Back Returns to previous menu.
5. Language Option Language Function Sets the language of OSD menu. Value English, Korean, French, Deutsch & Spanish.
6. Misc. Option Function Value Signal Source Converts the signal source. Fit to screen Converts the aspect ratio. Volume Adjust the level of audio volume. Reset Resets the monitor settings to the factory default. Back Returns to previous menu. VGA & DVI. 16:9 & 4:3 - 14 - 0 ~ 100.
7. Exit Option Exit Function Exits the OSD menu.
Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). 100 100 M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket.
▶ Pin Assignments Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ Accessories 1. Power cord. 2. Power adaptor 3. User manual. 4. VGA(RGB-PC) cable. 5. Stand & FS4x12 screws 2EA (Optional). 6. DVI cable (Optional). 7. Stereo cable (Optional). 8. Wall mount (Optional).
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system. Power Consumption Mode 18.5” 21.
18.5” 21.5” 18.5˝ Diagonal AM-TFT(Active-Matrix) 21.5˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(㎛): 300(H) x 300(V) Pixel pitch(㎛): 248.25(H) x 0.248.25(V) Brightness: 250cd/㎡(Typical) LCD Type Contrast ratio: 1000:1(Typical) Viewing angle: 170°/160°(H/V) Response time: 5ms(Typ.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
MEMO
MEMO
P/N : L39ME0223 Rev.