User manual

Before setting up the monitor, ensure that the power to the monitor and other attached
devices are turned off.
※ Notice: Stand & screws are optional
A. Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction using the included
screws in the accessory box.
3. Once assembled take the monitor up carefully and face the front side.
B. Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort. (Tilt Range: -3°~15°)
- 6 -
Stand BodyStand Base
FS4x12 screws
15˚-3˚