23-INCH WIDE TFT-LED MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
SAFETY INSTRUCTION ………………………………………………………….…… 2~3 CAUTIONS……………………………………………………………….......................... 4 FCC RF INTERFERENCE STATEMENT ……………………………....................... 5 INSTALLATION …………………………………………………………………………… 6 CONNECTING WITH EXTERNAL EQUIPMENT……………………………………… 7 CONTROLS AND FUNCTIONS ………………………………………………………… 8 ~ 16 MOUNTING GUIDE………………………………………………………………………..
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ※ Notice: Stand & Screws are optional A. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box. Stand Body Stand Base FS4x10 screws 3. Once assembled take the monitor up carefully and face the front side. B.
1. Rear Connection 1 2 3 1. PC STEROE IN. 2. VGA. 3. DVI. 4. HDMI. 5. DC 12V IN.
2. Bottom Key Control 1 2 3 4 5 6 7 8 1. SOURCE/ Selects VGA, DVI and HDMI inputs. Selects an option in the OSD. 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3, 4. AUTO/▼ & ▲ Moves another option in the OSD. The ▲ button converts the aspect ratio as 16:9 or 4:3. The AUTO/▼ button is auto adjustment function in the VGA input. 5, 6. VOL(-) & VOL(+) Adjusts the volume and menu settings. The VOL(-) button is the Sound off function. 7. / I Turns the power on or off.
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is yellow color. 3. Press the SOURCE/ button twice to enter the sub-menu and adjust the item. 4. Change the value you wish to adjust by using the VOL(-) & VOL(+) buttons. 5. Press the MENU button twice to exit the sub-menu and the adjusted item. 6.
2. Positioning Option Function Value Exit Returns to previous menu. Horizontal Adjusts the horizontally picture position. 0 ~ 100. Vertical Adjusts the vertically picture position. 0 ~ 100. ※Unavailable in DVI & HDMI inputs.
3. Image Settings Option Function Value Exit Returns to previous menu. Auto Adjust Auto geometry adjustment. Pixel Clock Adjusts the vertical noise of screen image. 0 ~ 100. Phase Adjusts the number of horizontal picture elements. 0 ~ 100. ※Unavailable in DVI & HDMI inputs.
4. Color Settings Option Function Value Color Adjust Adjusts red, green & blue colors of the picture. Color Temp Adjusts color temperature of the picture. 0 ~ 100. sRGB Preset, 9300K Preset, 6500K Preset, User Preset1). 1) User Preset Option Function Exit Returns to previous menu. Red, Green, Blue Adjusts red, green & blue colors of the picture. - 12 - Value 0 ~ 100.
5. OSD Settings Option Function Value Exit Returns to previous menu. Horizontal Position Moves the horizontally OSD position. 0 ~ 100. Vertical Position Moves the vertically OSD position. 0 ~ 100. OSD Hold Timer Adjusts the display time of OSD. 0 ~ 100. OSD Lock Displays the menu of OSD settings only.
6. Brightness / Contrast Option Function Value Exit Returns to previous menu. Brightness Adjusts brightness of the screen. 0 ~ 100. Contrast Adjusts intensity of the image. 0 ~ 100.
7. Language Option Function Exit Returns to previous menu. Language Sets the language of OSD menu. Value English, Spanish, French, Deutsch & Korean.
8. Misc. Option Function Value Exit Returns to previous menu. Initialize Resets the monitor settings to the factory default. Aspect Ratio Converts the aspect ratio.
Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). 100 100 M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket.
▶ Pin Assignments Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ Accessories 1. Power cord. 2. Power adaptor 3. User manual. 4. VGA(RGB-PC) cable. 5. Stand & FS4x10 screws 3EA. 6. DVI cable (Optional). 7. Stereo cable (Optional). 8. Wall mount (Optional).
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
23” 23˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.2655(H) x 0.2655(V) LCD Type Brightness: 250cd/m² (Typical) Contrast ratio: 1000:1(Typical) Viewing angle: 160°/160°(H/V) Response time: 5ms(Typical) Resolution (H x V) Frequency 1920X1080@60Hz Horizontal: 31~80kHz Vertical: 56~75Hz Digital Visual Interface (DVI 1.0 & HDCP 1.2) VGA (RGB-PC) Input Signal HDMI Visual Interface (HDMI 1.3) PC Stereo in Active Display Area (H x V) Packing Dimensions (W x D x H) 509.76mm x 286.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
MEMO
P/N : L39ME0271 Rev.
