Installation and User’s Guide Installation and User’s Guide FLAT LCD DISPLAY MOUNT MODEL CMH-01 Ceiling Mount http://www.orionimages.
Installation and User’s Guide http://www.orionimages.com Warning Statements The wall, floor or ceiling should be capable of supporting a weight of at least five (5) times the monitor’s weight. If it cannot, the wall, floor or ceiling must be reinforced. Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to Failure to do so could result in serious personal injury.
Installation and User’s Guide http://www.orionimages.com TABLE OF CONTENTS 1. PART LIST .……................................................................................................................. 3 2. INSTALLATION TOOLS .……............................................................................................. 3 3. ATTACHING THE CEILING ADAPTER .……................................................................... 5-6 4. ATTACHING THE MOUNTING PLATE .…….......................................
Installation and User’s Guide http://www.orionimages.com Part List NOTE: This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact ORION Images.
Installation and User’s Guide http://www.orionimages.com ATTACHING THE CEILING ADAPTER Step1 To attach the ceiling adapter to the suspension device (not included), rotate the ceiling adapter clockwise onto the suspension device a minimum of five (5) complete turns.
Installation and User’s Guide http://www.orionimages.com ATTACHING THE CEILING ADAPTER Step2 Once the ceiling adapter has been attached, tighten the M6 x 12mm Phillips head set screw using a Phillips screwdriver.
Installation and User’s Guide http://www.orionimages.com ATTACHING THE MOUNTING PLATE Step1 Use four (4) M10 hex head bolts, eight (8) M10 fl at washers, and four (4) M10 nuts to attach the mounting plate to the ceiling adapter.
Installation and User’s Guide http://www.orionimages.com ATTACHING THE MOUNTING PLATE Step2 Once the both units have been attached together, use a 17mm socket wrench and a 17mm wrench to tighten the M10 hardware.
http://www.orionimages.com Installation and User’s Guide Technical Specification All measurements are in inches (mm).
http://www.orionimages.com Installation and User’s Guide Limited Lifetime Warranty All Orion Images products carry a limited lifetime warranty from ship date against defects in materials and workmanship. Orion Images is not liable for improper installation that results in damage to mounts, adapters, display equipment or personal injury. Contact Orion Images In the event of missing and/or damage equipment, or technical questions, the following information can help in the completion of the installation.
