User Manual

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
VESA 100: Secure the VESA 75/100 mounting bracket to the VESA 75 Using the four M4 x 10
Phillip screws. Raise and secure your monitor to the plate that has the VESA 100 now on you CMK-
01 adapter and use the four (4) M4 x 10 (mm) Phillips screws (supplied) and a Phillips screwdriver.
(Do not use other tools other than a Phillips screwdriver to prevent damage to the monitor or
mounting points).
Do not over tighten the screws to the monitor failure to do so could result on
damaging the monitor or the mounting points. See figure 4.
CAUTION:
(4) M4 x 10mm
Phillips Flat Head screws
(4) M4 x 10
Philli
p
s
75 MM /
100 MM VESA
plate
Adapter Plate
Fi
g
ure 4
TENSION ADJUSTMENTS
Swivel tension
M6 X 8mm Set
Screw
Tilt tension
5
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone]
pg5