USER MANUAL ELECTRIC FAN WITH HUMIDIFIER Model: ORION OF1601S
Thank you for your purchase. Please read this manual thoroughly before plugging it in. Introduction This product has both fan and humidifier functions, which can be used together or separately. The humidifier is especially useful on very hot days, when the extra mist in the air helps not only to cool you down, but also to increase the humidity in the dry heat.
Installation 1: First base is installed in place of the main stable 2: The head fixed in the main part of the bearing hole 3: Installed guard and blade, and net fixed firmly lock the lookout Network Filling the water tank Place the fan on a flat, stable floor, then add water for the humidifying function as follows: 1. Open the water tank cover. 2. Lift out the water tank 4. Over a sink, turn the water 5. Screw off the tank cap, and tank so the outlet cap is add water. facing upwards. Operation 3.
*Insert plug to the electrical outlet, and the indicator light turns on. *Press “ON/SPEED” button to choose the wind for low, Med, High speed that matches the light on the control panel. *Press “MODE” to choose the wind type from one of the following: “Normal”: Wind flow based on Low/Med/High speed. “Breeze”: Imitates the flow of natural wind based on strong and soft wind.
Cleaning and Maintenance * Make sure power is disconnected before any cleaning or maintenance is performed. * It is recommended that you clean the water tank every 2-3 weeks of use, and clean the flume every week. * Pull out the water tank before cleaning it - pull the plastic tube out of the mist cask properly, then take out the mist cask and water tank. * Use a dry cloth to clean the mist cask. If there are stubborn stains on the mist cask, use a cloth lightly dampened with mild detergent.
WARNING: Unplug from electrical supply source before cleaning. After servicing, any safety device (including grilles and blades) must be reinstalled or remounted as previously installed. Use soft damp cloth then wipe with dry cloth. Do not use harmful cleaners. Do not bend the blades. If the plug and supply cord are damaged, it must be replaced by the manufacturer, its service agent or a suitable qualified person in order to avoid a hazard.
