INSTRUCTION MANUAL ELECTRIC FAN ENGLISH GB Model: OF16HF AC220V~50Hz, 120W RoHS http://www.orion.
DEAR CUSTOMERS! MANY THANKS FOR BUYING ORION ELECTRIC FAN! We really believe you will get the greatest pleasure from using this device for the years! Please, read the user’s guide in detail before first using of this fan. Introduction This product has both fan and humidifier functions, which can be used together or separately. The humidifier is especially useful on very hot days, when the extra mist in the air helps not only to cool you down, but also to increase the humidity in the dry heat.
Installation 1: First base is installed in place of the main stable 2: The head fixed in the main part of the bearing hole 3: Installed guard and blade, and net fixed firmly lock the lookout Network Filling the water tank Place the fan on a flat, stable floor, then add water for the humidifying function as follows: 1. Open the water tank cover. 2. Lift out the water tank 3. Take out the water tank. 4. Over a sink, turn the water 5. Screw off the tank cap, and tank so the outlet cap is add water.
“Sleep”: The fan runs for half an hour on strong then soft natural wind mode, then changes to soft natural wind for the next half hour, and then the fan turns off automatically. (1).Setting H: Operation pattern: H→Stop→H→Stop→H (2).Setting M: Operation pattern: M→stop →M→Stop→M (3)Setting L: Operation pattern: L→Stop→L→off→L *Press “SWING” to start oscillation; press again to fix the airflow direction.
Troubleshooting Fault Phenomenon Reason 1. Mist projector works normally, but without mist spray a. Water could be contaminated with other substances or chemicals b. Water tank could be cracked c. Water tank could be empty 2. Mist projector doesn’t work a. Bobber doesn’t float b. Water tank could be empty 3. No indicator light, no wind, no mist. a. Power cord is unplugged, and electric power is power off Solution a. Clean out the water tank and replace with clean water b.