Operation Manual

9
Operating Instructions
• Step 1. Put the scale on a hard surface. ( Avoiding carpets or any soft surface )
• Step 2. Switch on the scale with a slight tap on the glass platform near LCD
display. The wait a few seconds the following will appear:
Note: The scale will not work properly if you step on the scale before it shows 0.0. If
this happens please start from the beginning of step 2
• Step 3. Gently step on the scale. Put your feet evenly on the scale without
moving and wait whilst the scale computes weight. Your correct weight will
then be displayed in the following way: 80.3 Kg.
Automatic switch off
When you step off the scale, it will automatically switch off. (If no weighting is
carried out while the zero is being displayed, the scale will automatically switch off
after approximately 6 seconds).
Overload indiacator
When the scale is overloaded (over 150kg/330lb/24st) the following will appear on
the screen: ERR
Battery Change Indicator
When the batteries need replacing the following will appear on the screen: LO
Please open the back board of the scale, and then take the batteries carefully out of the
battery compartment. Please push the metal sheet outwards by your finger nails or a
sharp instrument.
The battery will pop up. Do not bend the contacts back while you do this, or they may
break. Dispose of the old batteries in a safe place. Do not place on fire.
Subject to change without notice
Extra information on ORION company web-site www.orion.ua
We take your opinion and offers by E-mail [e-mail]