Spec Sheet

STANDARD ACCESSORIES
TMIPHD7
IP / ANALOG CAMERA TESTER
SPECIFICATIONS
MORE PRODUCT VIEW
Signal Mode
Display
Video In
Communication
PTZ Protocol
Output
Audio Input Test
IP Scan
Link Monitor
PING Test
Touch Panel
Connectors
Connectivity
Storage
Power Adapter
Battery
Rechargeable
TMIPHD7
Video Test
PTZ Control
Audio
IP Scan & PING Test
Power
Power Output
7300 Bolsa Avenue, Westminster, CA 92683
Tel. [phone] / Fax. [phone] / [e-mail] / www.orionimages.com
Contract No. GS-03F-0152X
1 channel BNC input & 1 channel IP camera input (ONVIF ver. 2.0)
NTSC / PAL (Auto adapt)
RS485
PELCO-D & PELCO-P Compatible
DC12V 700mA power for camera
equipment IP addresses quickly
Checks IP address occupied status
Tests IP camera or Ethernet port of network equipment
for functionality as well as IP address
DC5V (1.5A)
On / Off
Built-in 3.7V Lithium polymer battery, 5000mAh
Charging time 3 to 4 hours, Working time up to 8 hours
Operation Setting
Key Tone
Parameter
English OSD menu
*Design and specifications are subject to change without notice
0.875 lbs
Dimension (W x H x D)
Weight
Dimension & Weight
7.87” x 4.80” x 0.51”
504MB
10 point capacitive multi-touch panel
Micro USB 2.0 x 1, Micro-SD slot x 1, RJ45 x 1, DC out x 1
WiFi 802.11 b/g/n
Test the pickup & other audio equipments on the front-end
Finds connected IP camera or other network
7 inch digital TFT-LCD / 1024 x 600 (RGB) resolution
Quarter View Side View
Rear View
Carrying Bag
DC12V Power
Network Cable
DC12V Power Cable
USB Capable Analog
Camera Cable
Strap
Pouch (Case)