Spec Sheet

5
T80-0006
Fasten wall plate to wall using screw (A) and washer (U).
Fije la placa de pared a pared con el tornillo (A) y la arandela (U).
Fixer la plaque murale au mur avec la vis (A) et la rondelle (U).
INSTALL WALL PLATE2
1b-3
1b-2
drill depth
65mm / 2.5”
drill diameter
11mm
7/16”
Insert (B) into both holes. Use a hammer to tap in if necessary.
Insertar (B) en los agujeros. Utilice un martillo para golpear en caso de necesidad.
Insérer (B) dans les deux trous. Utilisez un marteau pour enfoncer dans le cas échéant.
1b-3
CINDER BLOCK & CONCRETE INSTALLATION
B
Use 11 mm-7/16“ drill bit to drill 65mm - 2.5” holes on marks.
Utilice un 11 mm-7/16“ para perforar la madera poco 65mm - 2.5” agujeros.
Utilisez un
11 mm-7/16“ bits de forage pour percer 65mm - 2.5” po.
1b-2
CINDER BLOCK & CONCRETE INSTALLATION
2
8mm x 65mm
A
Washer
U