Manual

Complication (movement 915).
The quick date and day adjustment
must not be used between
3 p.m. and 1 a.m., because the
wheels for the change are active
during this time and may be dam-
aged.
Where fitted, open the screw-down
crown or QLC crown in accordance
with the instructions in Chapter 1.
Pull out the crown to position 2.
Turn the hand forwards past
12 oʼclock until the date
changes. Turn the hand further
until quarter past three.
Press pusher 3 with the special
tool provided, or with a wooden
toothpick, until the desired day
of the week is set.
Press pusher 4 and set the month.
Press pusher 5 and set the date.
Press pusher 6 and set the moon
display.
Since the moon moves a rela-
tively small distance within a
24 hour period, it is best to set
the moon setting when there
is a new moon or a full moon.
Use the crown to set the current
time – if it is in the afternoon,
turn it a further 12 hours.
The watch remains stopped when
it is in this crown position and
it can, for example, be started on
a time signal or the crown can be
pushed to position 1.
Push the crown to position 1.
Where fitted, close the screw-down
crown or QLC crown in ac-
cordance with the instructions in
Chapter 1.
Pos. 0 Crown is closed if it is a
screw-down crown or a
QLC crown
Pos. 1 Winding position
Pos. 2 Time and moon phase
setting
3 Pusher for day of the week
setting
4 Pusher for month setting
5 Pusher for date setting
6 Pusher for the moon phase
indicator
7 Day of the week indicator
8 Month indicator
9 Date indicator
10 Moon phase indicator
English
SUN JAN
31
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
30
29
28
27
26
25
24
7
6
5
4
3
2
1
102
4
56
3
10
87
9