User Guide

HD Video Transmission and HD Codec Specialist
1
4.5 The interface of H.265 HDMI encoder and WIFI encoder are the same：
4.6 The interface of H.265 SDI encoder and WIFI encoder are the same：
4.7 The interface of H.264 VGA encoder and WIFI encoder are the same：
A. Power input----- 12V/DC（12V/1A，5V/2A ）
B. Initialization button ------ It is used to reset the device . After power on , hold it on for
about 15 seconds to reset the device to default IP 192.168.0.31
C. Video input------ Input HD HDMI, SDI, VGA, Audio signals
D. 1000M Ethernet port
E. Status Indication：
1) It will flash while holding on the reset button. It means reset successfully
when the lights off .
2) Slow Flashing means the video input , image capturing and compression is
normally working .
3) If the indicator light keeps on, it means the image acquisition and
compression is with some problem .
4) If the indicator flashes slowly but the stream can not be played , it means
maybe there’s problem with the streaming server