User Guide

HD Video Transmission and HD Codec Specialist
2
5 WEB SETTINGS
Step 1: Reset & initialization
Input the power supply to turn on encoder and hold a pin to press RST on the encoder for
10 seconds, it will be restarted and initialized. The default Route IP of dash board is
192.168.0.31 after initialization.
Step 2: Change the administrator’s computer IP (in case of WIN 7)
Set the administrator’s computer IP as : 192.168.0.* to avoid IP conflicting with dashboard
IP 192.168.0.31. (mark “*” numbers range will be 0-254 except 31 )
Step 3: Login Dash board in IE
Enter 192.168.0.31 in URL address,
Default user Name: admin
Default password: admin
5.1 Status Display
When you access to the web-interface, you can choose the language on the right top :
Chinese/English
Input status: when you input the HD signal source, it will show resolution of video input , if
it’s blank here , it means there no video input .