Application Guide

Technical support: [e-mail]
Step 9: Change the IP in the Network Setting page. Please refer to the IP address of your PC(laptop)
before changing IP of video encoder.
Check step 4, you have already knew the IP and gateway of PC(Laptop).
In that case, that IP of router (PC/laptop) is 192.168.1.100, gateway is 192.168.1.1,DNS is 192.168.1.1
So, you can set the IP as 192.168.1.168 (192.168.1.xx; xx is a number from 2 to 255 except for 100)
Gateway is 192.168.1.1. DNS is 192.168.1.1 (As shown the picture bellow)
Step 10: After finished the IP sets, press “Set up”— “Reboot” button
Step 11: After reboot the encoder, Open the window of <Network and Sharing Center> ——''Local
Area Connection'' ——''Properties''——'' Internet Protocol Version 4(TCP /IPv4)''—— ''Obtain an IP
address automatically''—— click ''OK''