User Manual

29
PEDAL ASSIGN
It is possible to reprogram the 3 pedals of the CDP202 to perform different features if requested.
The Sustain (Pedal 1) and Sostenuto (Pedal 2) pedals can be programmed with the same list of
functions according to the player request. The Soft (Pedal 3) pedal will have a slightly different list
of functions.
PEDAL 1 and 2 ASSIGN
Press the SETTINGS button a few times until you select the Pedal Assign page.
Press the ENTER button to confirm and the display shows:
Press ENTER button to confirm. Using the using the Data Control wheel to select the other Pedal
functions:
Pdl-Null The pedal will have no function
Pdl-Sustain The pedal will work as Sustain/Damper pedal
Pdl-Soft The pedal will work as Soft pedal
Pdl-Sost The pedal will work as Sostenuto pedal
Pdl-Tap The pedal will work as TAP TEMPO button.
Pdl-MemoryUp The pedal will change the Panel Memory Registration to the next one
Pdl-Play The Pedal will be used as the PLAY button for Midi File Playing
When you have addressed the right Pedal Function press ENTER to confirm.
PEDAL 3 ASSIGN
Press the SETTINGS button a few times until you select the Pedal Assign page.
Press the ENTER button to confirm and the display shows:
Select the Pedal 3 page with the Data Control wheel.
Press ENTER button to confirm. Using the (/\) UP and (\/) Down DATA buttons or the Data
Control wheel to select the other Pedal functions:
Pdl-Null The pedal will have no function
Pdl-Sustain The pedal will work as Sustain/Damper pedal
Pdl-Soft The pedal will work as Soft pedal